DSSM/E01-A1B1 - FM Transmitter Lectrosonics - Free user manual and instructions
Find the device manual for free DSSM/E01-A1B1 Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bodypack Transmitter |
| Brand | Lectrosonics |
| Model | DSSM/E01-A1B1 |
| Category | FM Transmitter (RF Microphone Transmitter) |
| Frequency Range | 470.100 - 608.000 MHz (depending on block) |
| RF Power Output | 100 mW (switchable to 50 mW) |
| Modulation Type | Digital Hybrid Wireless (FM) |
| Audio Input Connector | TA5F locking (mic or line) |
| Input Gain Range | 44 dB in 1 dB steps |
| Controls | 2 buttons and LCD interface |
| Display | Backlit LCD |
| Battery Type | 2x AA alkaline or rechargeable NiMH |
| Battery Life | Up to 4 hours (varies with type) |
| Dimensions | 3.1 x 2.0 x 0.8 in (79 x 51 x 20 mm) |
| Weight | 5.3 oz (150 g) with batteries |
| Housing Material | Machined aluminum |
| Operating Temperature | -20°C to 50°C |
| Audio Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | > 120 dB |
| Power Requirement | 3.0 V DC (2x AA) |
| Compatible Receivers | Lectrosonics DCR, DCHR, and D Series |
| Accessories Included | None (operating guide only) |
| Maintenance | Wipe exterior with dry cloth; keep ports clean |
| Safety Certification | FCC, IC, CE approved |
| Spare Parts and Repair | Available through Lectrosonics authorized dealers |
Frequently Asked Questions - DSSM/E01-A1B1 Lectrosonics
How do I change the operating frequency on the DSSM/E01-A1B1?
Press the MENU button to enter the menu, then use the UP/DOWN buttons to select the frequency group and channel. Confirm with ENTER. The LCD shows the current frequency.
What type of batteries should I use?
Use high-quality alkaline or rechargeable AA batteries. For best performance, use lithium AA cells. Never mix different types or old and new batteries.
Can I use the transmitter with any Lectrosonics receiver?
The DSSM is compatible with Lectrosonics D Series digital receivers, including DCR, DCHR, and DSR models. Ensure they have the same frequency block.
How do I update the firmware?
Connect the transmitter to a computer using a micro USB cable. Download the latest firmware from the Lectrosonics website and follow the update tool instructions.
What is the maximum operating range?
With a clear line of sight, you can expect a range of up to 300 feet (90 meters). Obstructions and RF interference can reduce the range.
How do I adjust the audio input gain?
Go to the GAIN menu and set the input level from 0 to 44 dB in 1 dB steps. Adjust until the audio peaks are -20 dBFS on the receiver.
Is the transmitter weatherproof?
The DSSM is moisture-resistant with a weatherized casing, but it is not fully waterproof. Avoid submersion and excessive rain.
How do I clean the device?
Wipe the exterior with a soft dry cloth. Use compressed air to clean the connectors and ports. Do not use solvents or liquids.
What does the LED indicator show?
A solid green light indicates normal operation. Blinking red indicates low battery or overload. Continuous red means error.
Can I use a lavalier microphone with this transmitter?
Yes, connect your lavalier or headset mic to the TA5F input. Use a locking cable and adjust the input level for optimal audio.
User questions about DSSM/E01-A1B1 Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your FM Transmitter in PDF format for free! Find your manual DSSM/E01-A1B1 - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSSM/E01-A1B1 by Lectrosonics.
USER MANUAL DSSM/E01-A1B1 Lectrosonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lectrosonics
Model : DSSM/E01-A1B1
Category : FM Transmitter