DBSMD/E01-A1B1 - FM Transmitter Lectrosonics - Free user manual and instructions
Find the device manual for free DBSMD/E01-A1B1 Lectrosonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | FM Transmitter (Digital Hybrid Wireless®) |
| Brand | Lectrosonics |
| Model | DBSMD/E01-A1B1 |
| Dimensions | 3.0 x 2.3 x 0.8 in (76 x 58 x 20 mm) |
| Weight | 3.5 oz (99 g) with battery |
| Power Supply | Two AA alkaline or rechargeable batteries (1.5V each) |
| Battery Life | Up to 8 hours (alkaline) |
| Frequency Range | 470-614 MHz (UHF TV band) |
| Modulation | Digital Hybrid Wireless® (FM compatible) |
| RF Output Power | 25 mW (selectable low/high) |
| Audio Input | Locking 4-pin Hirose microphone/line input |
| Antenna | Removable 1/4 wave whip antenna |
| Construction | Machined aluminum body, black anodized finish |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Audio Frequency Response | 35 Hz to 20 kHz (±1 dB) |
| Dynamic Range | > 120 dB (A-weighted) |
| Controls | Power, mute, frequency select, gain adjust |
| LED Indicators | Power/battery, audio level, RF interference |
| Accessories Included | Antenna, belt clip, user manual |
| Warranty | 2 years limited manufacturer warranty |
| Cleaning and Maintenance | Wipe with dry cloth; avoid solvents; store in dry place |
| Spare Parts and Repairability | Contact Lectrosonics service center for parts and repair |
Frequently Asked Questions - DBSMD/E01-A1B1 Lectrosonics
How do I pair the DBSMD/E01-A1B1 with a receiver?
Ensure both transmitter and receiver are set to the same frequency. Use the arrow buttons to select a compatible frequency from the receiver's compatible list.
What type of batteries does the transmitter use?
It uses two AA batteries (alkaline or rechargeable). We recommend lithium or NiMH for longer life.
What is the operating range?
Typical range is up to 1000 ft (300 m) line-of-sight, depending on environment and RF interference.
How do I adjust the audio gain?
Use the gain control dial on the side of the transmitter. Set it so that the audio level indicator lights green, not red.
Can I use the transmitter with a lavalier microphone?
Yes, it accepts locking 4-pin Hirose connectors common for lavalier and headset microphones.
What do the LED colors mean?
Green: powered on; Yellow/Red: low battery; Flashing: audio overload or mute engaged.
How do I mute the transmitter?
Press and hold the MUTE button for 1 second. The LED will flash to indicate mute mode.
Is the transmitter compatible with analog receivers?
Yes, it uses digital hybrid technology that is backward compatible with most analog UHF receivers.
How can I extend battery life?
Reduce RF output power to low (10 mW) if range is sufficient, and use rechargeable NiMH batteries.
What should I do if the transmitter gets wet?
Remove batteries immediately, dry with a soft cloth, and let it air dry for 24 hours before use. If damage is suspected, contact Lectrosonics support.
User questions about DBSMD/E01-A1B1 Lectrosonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your FM Transmitter in PDF format for free! Find your manual DBSMD/E01-A1B1 - Lectrosonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBSMD/E01-A1B1 by Lectrosonics.
USER MANUAL DBSMD/E01-A1B1 Lectrosonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Lectrosonics
Model : DBSMD/E01-A1B1
Category : FM Transmitter