NT2508 - Receiver PHONIC - Free user manual and instructions
Find the device manual for free NT2508 PHONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | UHF Wireless Microphone Receiver |
| Brand | Phonic |
| Model | NT2508 |
| Receiver Type | Dual-channel true diversity |
| Frequency Range | 640.000 MHz - 690.000 MHz |
| Number of Channels | 2 x 8 preset frequencies |
| Audio Outputs | Balanced XLR and unbalanced 1/4" jack |
| Antenna Connectors | BNC detachable antennas |
| Squelch Control | Adjustable via front panel |
| Display | LCD showing frequency, RF and AF levels |
| Power Supply | DC 12V 500mA adapter included |
| Dimensions | 210 x 44 x 180 mm |
| Weight | 1.2 kg |
| Mounting | 19" rack mountable (1U) with included brackets |
| Compatible Transmitters | Phonic NT series handheld and bodypack transmitters |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean with a soft dry cloth |
| Safety | Keep away from water and humidity |
| Reparability | Modular internal design for easy servicing |
| Spare Parts | Available through Phonic authorized dealers |
Frequently Asked Questions - NT2508 PHONIC
How do I connect the NT2508 to a mixer or amplifier?
Use the balanced XLR outputs or unbalanced 1/4" jack outputs to connect to your mixer or amplifier. Make sure the receiver is set to the correct output level and the microphone is on.
How do I select a clean frequency to avoid interference?
Power on all other wireless equipment first, then use the frequency scan function on the NT2508 to find a clear channel. Alternatively, manually select a frequency with no RF interference.
What is the operating range of the NT2508?
In open air, the NT2508 typically operates up to 60 meters (200 feet). Walls and obstacles can reduce this range.
How do I replace a faulty antenna on the NT2508?
Unscrew the faulty antenna from its BNC connector and attach a new one. Tighten it firmly but do not force. Always use antennas of the same frequency range.
Can I use the NT2508 with other Phonic wireless transmitters?
Yes, the NT2508 is compatible with Phonic NT series transmitters, including handheld and bodypack models, provided they are set to the same frequency and channel.
How do I perform a factory reset on the NT2508?
Press and hold the SET button for 5 seconds until the display shows RESET, then confirm. This restores all factory defaults.
What power supply is required for the NT2508?
The NT2508 requires a 12V DC 500mA power adapter with a center-positive connector. Use only the adapter provided by Phonic.
How do I rack-mount the NT2508?
Attach the included rack mount brackets to the front of the unit using the supplied screws, then mount the receiver into a standard 19" rack using four rack screws.
How do I clean and maintain the NT2508?
Turn off the unit and disconnect the power adapter. Clean the surface with a soft, dry cloth. Do not use solvents or wet wipes.
The NT2508 has no audio output. What should I check first?
First check if the RF signal indicator is lit. If it is not, verify the transmitter is on, in range, and set to the same channel. Also check the audio cables and the output volume level on the receiver.
User questions about NT2508 PHONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual NT2508 - PHONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NT2508 by PHONIC.
USER MANUAL NT2508 PHONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHONIC
Model : NT2508
Category : Receiver