DMX2502 - Receiver PHONIC - Free user manual and instructions
Find the device manual for free DMX2502 PHONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX512 Receiver / Splitter |
| Brand | Phonic |
| Model | DMX2502 |
| Function | Receives DMX512 signal and distributes it to multiple isolated outputs |
| DMX Inputs | 2 x 5-pin XLR |
| DMX Outputs | 5 x 5-pin XLR |
| Input Voltage | 9-24V DC |
| Power Consumption | 5W |
| Dimensions | 483 x 200 x 44 mm (19\" 1U) |
| Weight | 2.0 kg |
| Mounting | 19\" rack-mountable |
| Housing | Metal chassis |
| LED Indicators | Power, Signal, Error |
| Output Isolation | Opto-isolated |
| DMX Termination | Built-in termination switch |
| Operating Temperature | 0°C to 40°C |
| Included Accessories | Power supply, user manual |
| Maintenance | Clean with a soft dry cloth |
| Safety | Do not expose to moisture or rain |
| Spare Parts | Available through Phonic service centers |
| General Information | Designed for professional stage lighting applications |
Frequently Asked Questions - DMX2502 PHONIC
How do I connect the DMX2502 to a DMX controller?
Connect a DMX cable from the controller's output to one of the DMX inputs on the DMX2502. Use the other input to daisy-chain to another receiver or device.
Can I use the DMX2502 as a wireless receiver?
No, the DMX2502 is a wired DMX512 receiver. For wireless operation, you would need a separate wireless DMX transmitter/receiver set.
What is the maximum cable length for DMX signals?
Standard DMX512 allows cable runs up to 300 meters (1000 feet). With the DMX2502, you can extend coverage by splitting and amplifying the signal to multiple branches.
How do I terminate the DMX link?
Set the termination switch on the last device in the chain to ON. On the DMX2502, use the built-in termination switch on the output that terminates the line.
Does the DMX2502 require a separate power supply?
Yes, the unit requires a 9-24V DC power supply (included) for operation. It does not draw power from the DMX bus.
How many DMX devices can I connect to one output?
Each DMX output can drive up to 32 device loads as per DMX512 standard. This allows you to control a large number of fixtures.
Is the DMX2502 compatible with standard DMX512 equipment?
Yes, it is fully compatible with USITT DMX512 protocol, ensuring interoperability with most professional lighting controllers and fixtures.
How do I reset the device?
Power cycle the unit by disconnecting and reconnecting the power supply. If problems persist, check all cable connections and ensure the DMX source is transmitting.
What should I do if the signal LED is not lighting up?
If the Signal LED is off, the unit is not receiving a valid DMX signal. Verify the DMX cable is connected, the controller is transmitting, and the input mode is correct.
Can I mount the unit in a rack case?
Yes, the DMX2502 has a standard 19-inch rack mount configuration with a 1U form factor, making it easy to install in a flight case or rack.
User questions about DMX2502 PHONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual DMX2502 - PHONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DMX2502 by PHONIC.
USER MANUAL DMX2502 PHONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHONIC
Model : DMX2502
Category : Receiver