AD-WT-8060 - Flat Panel Mount Atdec - Free user manual and instructions
Find the device manual for free AD-WT-8060 Atdec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flat panel wall mount |
| Brand | Atdec |
| Model | AD-WT-8060 |
| Recommended Screen Size | 32 to 80 inches |
| Maximum Load Capacity | 60 kg (132 lb) |
| VESA Compatibility | 100 x 100 mm to 600 x 400 mm |
| Tilt Adjustment | -5° to +15° |
| Level Adjustment | ±3° |
| Wall Clearance | 38 mm (1.5 in) |
| Material | Cold-rolled steel |
| Finish | Powder-coated matte black |
| Mounting Design | Tilting wall plate with safety latch |
| Mounting Hardware Included | Wall anchors, screws M4/M5/M6/M8, spacers |
| Product Dimensions (W x H x D) | 620 x 380 x 45 mm |
| Net Weight | 3.2 kg (7.1 lb) |
| Power Supply | None - manual mount |
| Cleaning | Wipe with a dry, soft cloth |
| Safety | Install on solid masonry, concrete or timber studs; do not exceed weight limit |
| Spare Parts and Repairability | Spare screws and brackets available from Atdec |
| Box Contents | Wall mount, hardware bag, instruction manual |
Frequently Asked Questions - AD-WT-8060 Atdec
What is the maximum screen size and weight supported by the Atdec AD-WT-8060?
The Atdec AD-WT-8060 supports flat panels up to 80 inches and a maximum load of 60 kg (132 lb). Always verify your TV weight before installation.
Which VESA hole patterns can I use with this mount?
This mount is compatible with VESA patterns from 100 x 100 mm to 600 x 400 mm, so most standard 32 to 80 inch TVs will fit.
How do I adjust the tilt angle after the screen is mounted?
Loosen the tilt screws on both sides of the bracket, set the screen from -5° to +15°, then retighten the screws to lock the position.
Can I mount the AD-WT-8060 on drywall?
Drywall alone is not recommended. The mount must be anchored into solid masonry, concrete or timber studs. If you must fix to drywall, use appropriate hollow-wall anchors rated for the load.
What tools are needed to install the wall mount?
You will need a drill, a screwdriver, a spirit level and masonry or wood drill bits, depending on the wall type.
How close to the wall will the TV sit?
The low-profile design keeps the screen at a distance of approximately 38 mm (1.5 in) from the wall, which gives a neat, integrated look.
How should I clean and maintain the mount?
Wipe the mount with a soft dry cloth. Do not use abrasive cleaners or solvents, as they may damage the powder-coated finish.
Are spare parts available for this Atdec model?
Yes, spare screws, spacers and brackets can be ordered from Atdec. Contact support and quote the model AD-WT-8060 to get the correct parts.
Does the mount allow the TV to be removed easily for servicing?
Yes, the screen plate can be lifted off the wall plate once the safety release latch is activated, making it easy to access the rear of the TV.
Is universal compatibility assured with any flat panel brand?
The mount is universal as long as the panel weighs no more than 60 kg and uses a VESA pattern within the supported range. Most major brands such as Samsung, LG and Sony are compatible.
User questions about AD-WT-8060 Atdec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flat Panel Mount in PDF format for free! Find your manual AD-WT-8060 - Atdec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AD-WT-8060 by Atdec.
USER MANUAL AD-WT-8060 Atdec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atdec
Model : AD-WT-8060
Category : Flat Panel Mount