VXC3FW - Loudspeaker YAMAHA - Free user manual and instructions
Find the device manual for free VXC3FW YAMAHA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Loudspeaker |
| Brand | Yamaha |
| Model | VXC3FW |
| Speaker Type | 2-way passive |
| Woofer Driver | 3.1" (8 cm) cone |
| Tweeter Driver | 0.75" (2 cm) dome |
| Power Handling (RMS) | 15 W |
| Power Handling (Peak) | 30 W |
| Impedance | 8 ohms |
| Frequency Range | 80 Hz - 20 kHz |
| Sensitivity | 87 dB (1 W, 1 m) |
| Dispersion Angle | 120 degrees conical |
| Dimensions (Dia x H) | 7.1" x 5.5" (180 x 140 mm) |
| Weight | 1.2 kg (2.6 lbs) |
| Material | Steel and polycarbonate |
| Color | White |
| Installation | Ceiling mount with clamp |
| Operating Temperature | 0°C - 40°C |
| Certifications | CE, RoHS |
| Spare Parts | Available via Yamaha service |
| Repairability | Serviceable by qualified technicians |
| Recommended Amplifier Power | 15 W - 30 W |
| Terminal Type | Screw terminal |
| Applications | Retail, office, background music |
| Accessories Included | Grille, mounting clips |
Frequently Asked Questions - VXC3FW YAMAHA
What type of speaker is the Yamaha VXC3FW?
The Yamaha VXC3FW is a 2-way ceiling loudspeaker designed for high-quality music and speech reproduction in commercial and residential installations.
How do I install the VXC3FW?
Use the included mounting clips and follow the provided template to cut a hole of the required diameter. Insert the speaker, tighten the clamps securely, and connect the wires to the screw terminal. Professional installation is recommended for optimal safety and performance.
Can the VXC3FW be used in outdoor environments?
No, the VXC3FW is intended for indoor use only. Exposure to moisture, rain, or extreme temperatures can damage the speaker and void the warranty.
What is the recommended amplifier power?
The recommended continuous RMS power is 15 watts, with a peak capacity of 30 watts. Use an amplifier that delivers between 15 and 30 watts to avoid distortion or damage.
What is the frequency response of this speaker?
The VXC3FW reproduces frequencies from 80 Hz to 20 kHz, making it suitable for both background music and clear voice announcements.
How should I clean the loudspeaker?
Use a soft dry cloth to wipe the grille and bezel. Do not use abrasive cleaners, solvents, or water directly on the speaker.
Does the VXC3FW require a recessed enclosure?
The speaker is designed to operate without an enclosure, but for best performance, a fire-rated back box may be installed. However, the speaker itself is a fully sealed unit.
Can I paint the speaker to match the ceiling?
The grille can be painted with water-based latex spray paint. Remove the grille first and apply thin coats for a uniform finish. Do not paint the driver diaphragm or enclosure.
What is the impedance of the VXC3FW?
The nominal impedance is 8 ohms, allowing multiple speakers to be connected in parallel to most residential and commercial amplifiers.
Where can I find spare parts or service?
Yamaha provides genuine spare parts through authorized service centers. Contact your local dealer or Yamaha support for repair assistance. Do not disassemble the speaker yourself.
User questions about VXC3FW YAMAHA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual VXC3FW - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VXC3FW by YAMAHA.
USER MANUAL VXC3FW YAMAHA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : YAMAHA
Model : VXC3FW
Category : Loudspeaker