YAMAHA

VC8B - Loudspeaker YAMAHA - Free user manual and instructions

Find the device manual for free VC8B YAMAHA in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice YAMAHA VC8B - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type of product Loudspeaker
Brand Yamaha
Model VC8B
Speaker type In-ceiling speaker
Nominal impedance 8 ohms
Power handling 30W (RMS)
Sensitivity 87 dB (1W/1m)
Frequency response 100 Hz - 20 kHz
Driver configuration Coaxial 2-way
Woofer size 8 cm
Tweeter size 2 cm
Dimensions (diameter) 235 mm
Installation depth 120 mm
Mounting cut-out 200 mm
Weight 1.5 kg
Casing material ABS plastic with metal grille
Operation Passive, requires external amplifier
Protection rating IPX3
Color Black
Cleaning Wipe with soft dry cloth
Safety Install in dry, ventilated location
Maintenance No user-serviceable parts; contact qualified service
Spare parts Available on request
General use Background music, paging, commercial premises

Frequently Asked Questions - VC8B YAMAHA

How do I install the VC8B speaker in a ceiling?
To install the VC8B, mark a cut-out hole of 200mm diameter (see features). Cut the hole, feed the speaker wires, connect them to the speaker terminals, then insert the speaker into the hole and tighten the tightening clamps. Ensure secure fixing to prevent vibrations.
What is the recommended amplifier power?
The VC8B has a power handling of 30W RMS. We recommend an amplifier capable of delivering 15W to 30W per channel at 8 ohms. Over-powering may damage the speaker.
Can the VC8B be used outdoors?
The VC8B is designed for indoor or covered areas. With an IPX3 rating, it can withstand light splashes, but it should not be exposed to heavy rain or humidity.
Can I paint the speaker grille to match my ceiling?
Yes, the grille is paintable. Use a suitable spray paint and remove the grille first for best results. Ensure not to clog the holes.
How do I connect the speaker wires?
Connect the positive wire to the red terminal and the negative wire to the black terminal. For a 100V line system, the VC8B may include a transformer tap selector (if applicable). Refer to the manual for exact connections.
What are the dimensions of the VC8B?
The speaker has an outer diameter of 235 mm, an installation depth of 120 mm, and requires a cut-out of 200 mm. The weight is 1.5 kg.
Does the VC8B include a mounting bracket?
Yes, the speaker comes with mounting clamps for quick installation in ceilings. No additional bracket is required.
What is the frequency response?
The frequency response is 100 Hz to 20 kHz, providing clear reproduction of vocals and music.
How do I clean the VC8B?
Clean the grille and frame with a soft, dry cloth. Use a vacuum cleaner with a brush attachment on the grille to remove dust. Avoid water and solvents.
Is the VC8B repairable?
The VC8B contains no user-serviceable parts. For any repair or replacement of parts, contact a qualified Yamaha service center.

User questions about VC8B YAMAHA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual VC8B - YAMAHA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VC8B by YAMAHA.

USER MANUAL VC8B YAMAHA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : YAMAHA

Model : VC8B

Category : Loudspeaker