DPDM-6-20-PA - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free DPDM-6-20-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic linear actuator (compact cylinder) |
| Manufacturer | Festo |
| Model | DPDM-6-20-PA |
| Bore Size | 6 mm |
| Stroke Length | 20 mm |
| Operating Pressure | 1 to 8 bar |
| Operating Medium | Compressed air (filtered, with or without lubrication) |
| Port Size | M5 (threaded port) |
| Cushioning | Elastic cushioning rings at both ends |
| Mounting Type | Through-hole and threaded mounting holes |
| Operating Temperature | -10 °C to +60 °C |
| Weight | Approx. 0.03 kg |
| Dimensions (H × W × L) | 20 × 10 × 50 mm (approx.) |
| Main Functions | Converts pneumatic energy into precise linear motion for automation processes |
| Maintenance | Inspect seals and moving parts periodically; relubricate if necessary |
| Cleaning | Wipe with a dry, lint-free cloth; do not use aggressive solvents |
| Safety | Operate within specified pressure and temperature ratings; ensure secure mounting |
| Spare Parts & Repairability | Seal kits, piston rods and other parts available from Festo; repairable with standard tools |
| General Information | Designed for industrial automation; compatible with Festo accessories and valves |
Frequently Asked Questions - DPDM-6-20-PA Festo
What is the Festo DPDM-6-20-PA?
The Festo DPDM-6-20-PA is a compact pneumatic linear actuator (cylinder) used in industrial automation to provide precise linear motion driven by compressed air.
How does the DPDM-6-20-PA work?
The actuator converts the energy of compressed air into mechanical force. When air is supplied to one port, the piston moves along the stroke length (20 mm), and elastic cushioning absorbs impact at the ends.
What is the maximum operating pressure?
The recommended operating pressure range is 1 to 8 bar. Exceeding this could damage the seals or the cylinder body.
How do I mount the DPDM-6-20-PA?
Mount the actuator using the through-holes or threaded holes provided on the body. Ensure the mounting surface is flat and rigid, and use appropriate screws of the correct size.
What are the dimensions of this actuator?
Typical dimensions are approximately 20 mm in height, 10 mm in width, and 50 mm in length, but exact values may vary; refer to the Festo datasheet for precise measurements.
How do I connect the air supply?
Connect the compressed air lines to the M5 threaded ports. Use appropriate fittings (e.g., push-in connectors) and ensure tight sealing. The supply should be dry, clean, and within the pressure range.
What maintenance is required?
Periodically inspect the piston rod and seals for wear, and check for air leaks. If the cylinder is in a harsh environment, clean external surfaces with a dry cloth. Lubrication is not usually required because Festo seals are pre-lubricated, but follow the manual if needed.
What temperature range can the DPDM-6-20-PA operate in?
The standard operating temperature range is -10 °C to +60 °C. For extreme conditions, contact Festo for special versions.
Where can I find spare parts?
Original Festo spare parts, such as seal kits and piston rods, are available through authorized Festo distributors or the Festo online shop. Use only genuine parts to ensure proper function.
Is the DPDM-6-20-PA suitable for all industrial environments?
It is designed for general industrial automation. However, for corrosive, wet, or explosive atmospheres, consult Festo to select a suitable version with appropriate protection ratings.
User questions about DPDM-6-20-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual DPDM-6-20-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPDM-6-20-PA by Festo.
USER MANUAL DPDM-6-20-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DPDM-6-20-PA
Category : Industrial Automation