DPDM-32-25-PA - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free DPDM-32-25-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic cylinder |
| Series | DPDM |
| Bore Size | 32 mm |
| Stroke Length | 25 mm |
| Operating Mode | Double-acting |
| Operating Pressure | 1 bar to 10 bar |
| Ambient Temperature | -10 °C to 60 °C |
| Operating Medium | Compressed air per ISO 8573-1:2010 |
| Cushioning | Adjustable pneumatic cushioning |
| Piston Rod Thread | M10x1.25 (typical for 32 mm bore) |
| Mounting Type | Via accessories (foot, flange, clevis) |
| Seal Material | NBR or Polyurethane |
| Maintenance | No lubrication required; keep clean and dry |
| Safety Features | Low pressure start-up recommended; avoid side loads |
| Spare Parts | Seal kits and piston rod available from Festo |
| Weight | Approx. 0.6 kg |
| Reparability | Serviceable; seals replaceable with standard tools |
| Standards | Designed to ISO 6431 / VDMA 24562 dimensions |
Frequently Asked Questions - DPDM-32-25-PA Festo
What is the bore size and stroke of the Festo DPDM-32-25-PA?
The bore size is 32 mm and the stroke length is 25 mm. This defines the basic size of the pneumatic cylinder.
What type of cylinder is the DPDM-32-25-PA?
It is a double-acting pneumatic cylinder, meaning it uses compressed air to move the piston in both directions.
What is the operating pressure range for this Festo cylinder?
The recommended operating pressure is 1 to 10 bar. Always start with a lower pressure to verify proper installation.
Does the DPDM-32-25-PA require any lubrication?
In standard operation, the cylinder is maintenance-free. If lubrication is used, it must be permanent oil lubrication and compatible with NBR seals.
How should I install the DPDM-32-25-PA correctly?
Mount the cylinder using appropriate mounting brackets (foot, flange, or clevis). Ensure the piston rod is aligned to avoid side loads that can damage the seals.
What should I do before first use?
Check that the operating pressure is within the specified range, and perform a slow cycle to purge any air from the system. Verify all connections are tight.
Can the cushioning be adjusted on this cylinder?
Yes, the DPDM-32-25-PA has adjustable pneumatic cushioning. Use the adjustment screws at the end caps to tune the end-of-stroke speed.
What are the available mounting accessories for the DPDM-32-25-PA?
Festo offers a range of accessories such as foot mounts, flange mounts, and clevis brackets. These are designed to fit the 32 mm bore cylinder profile.
How can I order spare parts for the DPDM-32-25-PA?
Contact your local Festo distributor and provide the exact model number. Common spares include seal kits and replacement piston rods.
What maintenance routine is recommended?
Regularly wipe the piston rod clean, check for air leaks, and verify cushioning settings. Replace worn seals immediately to prevent contamination.
User questions about DPDM-32-25-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual DPDM-32-25-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPDM-32-25-PA by Festo.
USER MANUAL DPDM-32-25-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DPDM-32-25-PA
Category : Industrial Automation