POE-172S - Unknown Planet - Free user manual and instructions
Find the device manual for free POE-172S Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Power over Ethernet (PoE) injector |
| Interfaces | 1 x 10/100/1000 Mbps RJ-45 input, 1 x 10/100/1000 Mbps PoE output |
| PoE Standard | IEEE 802.3af/at (PoE/PoE+) |
| Power Output | 48V DC, up to 30W per port |
| Input Power | 100-240V AC, 50/60Hz (external power adapter) |
| Dimensions | 70 x 26 x 94 mm (W x H x D) |
| Weight | 250 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 5% to 90% non-condensing |
| LED Indicators | Power, PoE, Link/Act |
| Functionality | Plug and play, no configuration required |
| Safety Features | Overload and short circuit protection, CE/FCC certified |
| Installation | Desktop or wall-mountable |
| Maintenance | Clean with a dry cloth, avoid liquids |
| Repairability | No user-serviceable parts; contact authorized service center |
| General Information | Indoor use only, not waterproof |
Frequently Asked Questions - POE-172S Planet
What is a PoE injector and how does it work?
A PoE injector adds power over Ethernet to a standard Ethernet cable. It combines data from a non-PoE switch with DC power from its own adapter, allowing devices like IP cameras to receive both through a single cable.
Is the POE-172S compatible with all IP cameras?
It is compatible with any IEEE 802.3af/at device, including most IP cameras, wireless access points, and VoIP phones. Check your device's power requirements to ensure they do not exceed 30W.
How do I install the POE-172S?
Connect your network switch to the LAN input port, then connect the PoE output port to your powered device. Plug in the AC adapter and the LEDs will indicate proper operation.
What are the LED indicators on the POE-172S?
The LEDs show Power (green), PoE (orange) when power is delivered, and Link/Act (green) when a connection is active. Flashing indicates data transmission.
Can it power a PTZ camera?
Yes, if the PTZ camera complies with 802.3af/at and draws less than 30W. Many PTZ cameras within that range will work without issues.
Does the POE-172S require any configuration?
No, it is plug and play. No software or switch settings are needed, making it ideal for quick deployments.
What is the maximum cable length between the injector and the device?
The maximum cable length is 100 meters (328 feet) for Ethernet, including the patch cords, due to the IEEE 802.3 standard.
Can I use this injector with a non-PoE switch?
Absolutely. The injector is designed to add PoE to a standard Ethernet network. It uses the data from the switch and adds power from its adapter locally.
What is the power consumption of the POE-172S itself?
The device consumes a small amount of power for its own circuitry, typically less than 2W. The 30W output is for the powered device.
How do I clean and maintain the POE-172S?
Disconnect the adapter and wipe the enclosure with a soft, dry cloth. Do not use chemicals or moisture. Regularly check the ports for dust to ensure reliable connections.
User questions about POE-172S Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual POE-172S - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POE-172S by Planet.
USER MANUAL POE-172S Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : POE-172S
Category : Unknown