CTH133T - Air conditioner Mirage - Free user manual and instructions
Find the device manual for free CTH133T Mirage in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Room Air Conditioner |
| Brand | Mirage |
| Model | CTH133T |
| Cooling Capacity (BTU/h) | 13,000 BTU/h |
| Cooling Capacity (kW) | 3.8 kW |
| Power Supply | 230 V / 60 Hz |
| Power Consumption (W) | 1,200 W |
| Refrigerant | R-410A |
| Operating Modes | Cool, Fan, Dry |
| Fan Speeds | Low, High |
| Noise Level (High Speed) | 55 dB |
| Dimensions (W x H x D) | 610 x 460 x 560 mm |
| Weight | 48 kg |
| Filter | Washable anti-dust filter |
| Timer | 24-hour programmable |
| Remote Control | Yes, with LCD display |
| Auto Restart | Yes |
| Installation | Window mounting kit included |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Overheat protection, restart delay |
Frequently Asked Questions - CTH133T Mirage
How often should I clean the air filter?
For optimal performance, clean the air filter every two weeks. A dirty filter restricts airflow and reduces cooling efficiency. Use a vacuum or wash with warm water and allow it to dry completely before replacing.
Can I use an extension cord with this air conditioner?
It is not recommended to use an extension cord. The unit's high power draw can overheat most extension cords, creating a fire hazard. Plug the air conditioner directly into a dedicated wall outlet.
What does the 'E' code mean on the display?
An 'E' code indicates a sensor error or system malfunction. Consult the troubleshooting section of your manual. In most cases, turning the unit off and unplugging it for 30 minutes will reset the system.
Does the CTH133T have a heating function?
This model is a cool-only air conditioner. It does not provide heat. For heating, look for a heat pump model or use a separate heater.
How do I install the window kit?
Attach the window kit to the bottom of the unit, slide it into the window frame, and close the window securely. Use the provided screws to lock it in place. Seal gaps with foam insulation for maximum efficiency.
What is the best temperature to set for cooling?
For energy savings and comfort, set the thermostat to 78°F (25°C) during summer. Each degree below this increases energy consumption by about 5%.
Can I leave the air conditioner on all day?
Yes, the unit is designed for continuous operation. Use the 24-hour timer to schedule it automatically. Make sure the drainage system is properly set up to avoid overflow.
How do I reset the air conditioner?
To reset, press the RESET button on the power cord or the control panel. If your model doesn't have a button, unplug the unit for 30 minutes and plug it back in.
Is the air conditioner WiFi or smart-enabled?
This model does not include built-in WiFi. It comes with a remote control for manual operation. You can use an external smart plug if the unit is not permanent.
What should I do if the unit is leaking water inside?
Check if the condensate pan is full or the drain hose is blocked. Clean the drain outlet and ensure the unit is slightly tilted downward to the outside for proper drainage.
User questions about CTH133T Mirage
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual CTH133T - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CTH133T by Mirage.
USER MANUAL CTH133T Mirage
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mirage
Model : CTH133T
Category : Air conditioner