CHC261R - Air conditioner Mirage - Free user manual and instructions
Find the device manual for free CHC261R Mirage in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air conditioner |
| Brand | Mirage |
| Model | CHC261R |
| Installation type | Window mounted / through-wall |
| Cooling capacity | 26000 BTU/h |
| Heating capacity | 26000 BTU/h (heat pump) |
| Power supply | 230 V, 60 Hz, 1-phase |
| Dimensions (H × W × D) | 660 × 965 × 770 mm |
| Net weight | 110 kg |
| Refrigerant | R410A |
| Air flow (high) | 580 m³/h |
| Energy efficiency ratio (EER) | 10.5 |
| Control type | Remote control with digital display |
| Air filter | Washable anti-bacterial mesh |
| Safety features | Overload protection, restart delay |
| Maintenance | Clean air filter every 2 weeks |
| Operating cooling range | 18°C to 43°C |
| Operating heating range | -10°C to 24°C |
| Spare parts | Filter, remote control, motor, compressor |
| Warranty | 1 year parts and labor |
| Compressor type | Rotary |
| Fan speeds | 3 speeds + auto |
| Air direction | Horizontal and vertical louvers |
Frequently Asked Questions - CHC261R Mirage
How often should I clean the air filter?
You should clean the air filter every two weeks under normal use. A dirty filter reduces cooling efficiency and can cause frost buildup.
What does error code E1 indicate?
Error code E1 usually indicates a room temperature sensor issue. Check if the sensor is detached or damaged, and reset the unit.
Can I use an extension cord?
No. Always plug the unit directly into a dedicated wall outlet with the correct voltage rating. Extension cords may overheat and create a fire risk.
Why is my air conditioner not cooling properly?
Check the air filter, ensure all windows and doors are closed, and confirm the temperature setpoint is lower than room temperature. If the issue persists, inspect for refrigerant leaks.
How do I set the timer on the remote control?
Press the Timer button on the remote, then use the up/down arrows to set the desired hours. The unit will turn on or off automatically after the set time.
What is the recommended room size for this unit?
This air conditioner is rated for rooms of up to about 75 square meters (roughly 800 sq ft), depending on insulation and sunlight.
Can the unit be used as a heater in winter?
Yes, the CHC261R is a heat pump model, so it can provide heating down to -10°C. It will automatically switch to heating mode when selected.
How do I reset the air conditioner after a power failure?
Unplug the unit for 5 minutes, then plug it back in. If the display shows error codes, press the reset button on the control panel.
What type of refrigerant does this unit use?
The Mirage CHC261R uses R410A refrigerant, which is more environmentally friendly than older R22 systems.
Is the CHC261R suitable for in-wall installation?
Yes, it is designed for vertical or horizontal through-wall mounting as well as window installation. Use the provided mounting bracket and seal all gaps to reduce air leakage.
User questions about CHC261R Mirage
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual CHC261R - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CHC261R by Mirage.
USER MANUAL CHC261R Mirage
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mirage
Model : CHC261R
Category : Air conditioner