ELC261T - Air conditioner Mirage - Free user manual and instructions
Find the device manual for free ELC261T Mirage in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Split system air conditioner |
| Brand | Mirage |
| Model | ELC261T |
| Cooling capacity | 2.6 kW (approximately 9000 BTU/h) |
| Heating capacity | 2.6 kW (reverse cycle) |
| Power supply | 220-240 V ~ 50 Hz |
| Refrigerant | R32 |
| Indoor unit dimensions (W x H x D) | 750 x 250 x 190 mm |
| Outdoor unit dimensions (W x H x D) | 600 x 420 x 230 mm |
| Indoor unit weight | 7.5 kg |
| Outdoor unit weight | 20 kg |
| Noise level (indoor) | 24-38 dB(A) |
| Operating modes | Cooling, heating, dry, fan |
| Fan speeds | 3 speeds (low, medium, high) |
| Air filter | Washable anti-bacterial filter |
| Timer | 24-hour programmable timer |
| Remote control | Yes, with LCD display |
| Energy efficiency | Energy class A |
| Maintenance | Clean filters every 2 weeks; annual professional service |
| Safety features | Auto restart, overload protection, self-diagnosis |
Frequently Asked Questions - ELC261T Mirage
How do I clean the air filter?
Turn off the air conditioner and disconnect power. Open the front panel, slide out the filter, and wash it with lukewarm water and a mild detergent. Let it air dry completely before placing it back. Regular cleaning helps maintain air quality and efficiency.
What type of refrigerant does the ELC261T use?
The Mirage ELC261T uses R32 refrigerant, which is environmentally friendly and offers improved energy efficiency compared to older refrigerants.
Can I use the air conditioner as a heater?
Yes, the ELC261T is a reverse cycle unit, so it provides both cooling and heating functions. You can switch to heat mode via the remote control or the unit display.
What are the possible error codes?
Common error codes include E1 (sensor fault), E2 (communication error), and E4 (overload). Refer to the user manual for a full list. The unit displays self-diagnostic error codes on the indoor panel.
How can I improve energy efficiency?
Set the thermostat to a comfortable temperature, use the timer, clean filters regularly, and shade the outdoor unit from direct sunlight. Also, close windows and doors while the unit is running.
Can I install the unit myself?
Installation should be performed by a qualified technician. It involves refrigerant lines, electrical wiring, and proper mounting. Incorrect installation may void the warranty and create safety hazards.
What is the recommended maintenance schedule?
Clean the air filters every two weeks. Have the unit professionally serviced once a year, including checking refrigerant levels, cleaning the coils, and inspecting electrical connections.
How do I use the timer function?
Press the TIMER button on the remote control. Use the +/- buttons to set the desired shutoff or startup time. The timer can be programmed up to 24 hours in advance.
What should I do if the unit is not cooling properly?
Check if the air filter is dirty, then clean it if needed. Verify that doors and windows are closed. Ensure the thermostat is set lower than the room temperature. If the problem persists, contact a service technician.
Is there an auto restart function?
Yes, the ELC261T features auto restart. After a power failure, the unit will resume its previous operation settings automatically when power is restored.
User questions about ELC261T Mirage
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ELC261T - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELC261T by Mirage.
USER MANUAL ELC261T Mirage
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mirage
Model : ELC261T
Category : Air conditioner