AQA-4000 - Faucets Foset - Free user manual and instructions
Find the device manual for free AQA-4000 Foset in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Kitchen faucet with pull-out sprayer |
| Brand | Foset |
| Model | AQA-4000 |
| Material | Solid brass body, stainless steel sprayer |
| Finish | Chrome or brushed nickel (depending on variant) |
| Installation Type | Deck-mounted, single-hole installation |
| Overall Height | 16.2 in (411 mm) |
| Spout Height | 8.5 in (216 mm) |
| Spout Reach | 6.3 in (160 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Flow Rate | 1.5 GPM (5.7 L/min) at 60 psi |
| Cartridge Type | Ceramic disc cartridge, 35 mm |
| Handle Type | Single lever with smooth control |
| Spout Type | High-arc 360° swivel spout |
| Supply Hoses | 2 stainless steel braided hoses, 16 in (406 mm) |
| Aerator | Standard male aerator, 15/16" thread |
| Warranty | Limited lifetime warranty on finish and function |
| Care Instructions | Clean with mild soap and water; avoid abrasive cleaners or scouring pads |
| Safety Compliance | Lead-free compliant (NSF/ANSI 61) |
| Spare Parts | Replacement cartridge, aerator, and sprayer hose available |
Frequently Asked Questions - AQA-4000 Foset
How do I install the Foset AQA-4000 faucet?
To install the AQA-4000, first ensure the water supply is turned off. Place the rubber gasket and mounting nut on the faucet shank, then insert the shank through the single hole in the countertop. From underneath, tighten the mounting nut securely. Connect the supply hoses to the water shut-off valves, and turn on the water to check for leaks. The included installation guide provides step-by-step diagrams for a trouble-free setup.
How do I remove the handle to replace the cartridge?
Check if there is a small set screw under the handle cap. Pry off the cap (usually marked with a blue/red index), then loosen the set screw with an Allen wrench. Pull the handle straight up to expose the cartridge. Unscrew the retaining nut, then lift out the old cartridge. Install the new ceramic disc cartridge and reassemble in reverse order.
What is the recommended water pressure for this faucet?
The recommended water pressure is between 20 psi and 80 psi. For optimal performance, a pressure of about 50 psi is ideal. High pressure above 80 psi could cause damage or leaks, so consider a pressure regulator if your home supply exceeds this.
How do I clean the AQA-4000 to keep it looking new?
Clean the faucet with a soft cloth dampened with mild soap and water. Rinse thoroughly and dry with a clean towel. Avoid abrasive cleaners, scouring pads, and harsh chemicals like ammonia or bleach, as they can damage the finish.
My faucet is leaking at the spout. What should I do?
A leaking spout is usually caused by a worn cartridge or a loose seat. First, turn off the water supply and relieve pressure by opening the handle. Disassemble the handle, remove the cartridge, and inspect it for cracks or debris. If needed, replace the cartridge with a new one. Also check that the retaining nut is snug, but not over-tightened.
Can I use this faucet with both hot and cold water?
Yes, the AQA-4000 is designed for both hot and cold water connections. The supply hoses are labeled (red for hot, blue for cold) to ensure correct hookup. It is compatible with standard 3/8-inch compression fittings.
How do I replace the aerator?
The aerator is located at the tip of the spout. Unscrew it counterclockwise by hand, or use pliers wrapped in cloth to avoid scratches. Clean the old aerator or install a new one, then tighten it clockwise by hand until snug. Do not over-tighten.
Does the faucet come with supply hoses?
Yes, the faucet includes two stainless steel braided hoses that are 16 inches long. They have 3/8-inch compression threads on the free end for connection to standard shut-off valves. No additional hoses are required for most installations.
What does the limited lifetime warranty cover?
The warranty covers defects in material and workmanship for the life of the faucet. It includes repair or replacement of the cartridge, aerator, and all non-wearable parts. It does not cover damage from misuse, improper installation, or water conditions outside normal municipal supply. Finish is also covered as long as it is cleaned according to instructions.
My countertop has no pre-drilled hole. Can I still install the faucet?
Yes, you will need to drill a 1 3/8-inch diameter hole through the countertop. Use a diamond core drill bit for stone or porcelain, or a standard hole saw for wood/laminate. Mark the spot, drill slowly with water cooling, and clean debris. Then follow the standard installation steps.
User questions about AQA-4000 Foset
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucets in PDF format for free! Find your manual AQA-4000 - Foset and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AQA-4000 by Foset.
USER MANUAL AQA-4000 Foset
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Foset
Model : AQA-4000
Category : Faucets