RIM-46 - Faucet Foset - Free user manual and instructions
Find the device manual for free RIM-46 Foset in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Faucet |
| Brand | Foset |
| Model | RIM-46 |
| Mounting Type | Deck-mounted |
| Handle Type | Single lever |
| Cartridge Type | Ceramic disc |
| Connection Size | 1/2 inch (15 mm) |
| Max Flow Rate | Approx. 7.5 L/min at 3 bar |
| Operating Pressure | 0.5 - 5 bar |
| Spout Reach | Approx. 15 cm |
| Spout Height | Approx. 25 cm |
| Width | Approx. 20 cm |
| Weight | Approx. 1.5 kg |
| Material | Brass body |
| Finish | Chrome plated |
| Compliance | Watermark certified |
| Installation | Horizontal or vertical mounting |
| Cleaning | Wipe with damp cloth; avoid abrasive cleaners |
| Safety | Hot water safety stop at 38°C |
| Spare Parts | Cartridge and aerator replaceable |
| Documentation | Downloadable PDF manual |
Frequently Asked Questions - RIM-46 Foset
How do I install the Foset RIM-46 faucet?
Installation requires a deck-mounted setup. Connect the 1/2 inch supply lines to the inlet ports, secure the faucet with the mounting nut, and tighten the base plate. Ensure the water supply is shut off before installation.
What is the recommended water pressure range for the RIM-46?
The faucet operates optimally between 0.5 and 5 bar. Lower pressure may reduce flow, while higher pressure could damage the cartridge.
How do I clean the faucet to maintain its chrome finish?
Wipe the surface with a soft damp cloth and mild soap. Avoid abrasive cleaners, scouring pads, or chemical agents that can tarnish the chrome plating. Dry with a soft towel.
What should I do if the faucet leaks from the base?
Check the O-rings and mounting seals for wear or damage. Tighten the mounting nut, and if leaking persists, replace the rubber seals or contact a professional plumber.
Can I replace the cartridge in the RIM-46 myself?
Yes, the ceramic disc cartridge is user-replaceable. Shut off the water, remove the handle and retaining ring, pull out the old cartridge, and insert a new one. Use a compatible 35mm cartridge.
Does the RIM-46 have a hot water safety stop?
Yes, the faucet includes a built-in safety stop that limits handle movement to approximately 38°C to prevent scalding. Override buttons are available for hotter water.
What is the flow rate of the RIM-46?
At a standard water pressure of 3 bar, the flow rate is approximately 7.5 liters per minute. Actual flow depends on the local water pressure.
Are aerator and spare parts available for purchase?
Yes, the aerator and cartridge are available as spare parts. You can find them through Foset authorized dealers or online stores. Always match the exact model RIM-46 for compatibility.
Can the RIM-46 be installed with a water heater?
The faucet is compatible with standard water heaters up to 60°C. Ensure the water pressure remains within the specified range and use appropriate supply lines.
What does the warranty cover for this faucet?
Typically, Foset provides a 5-year warranty against manufacturing defects on the body and finishes. It covers leaks, dripping, and finish defects, but not damage from improper installation or abrasive cleaners.
User questions about RIM-46 Foset
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual RIM-46 - Foset and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RIM-46 by Foset.
USER MANUAL RIM-46 Foset
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Foset
Model : RIM-46
Category : Faucet