Pyle

PLCMTR104 - Rear Camera Pyle - Free user manual and instructions

Find the device manual for free PLCMTR104 Pyle in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PLCMTR104 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Rear View Camera
Brand Pyle
Model PLCMTR104
Image Sensor 1/3-inch CMOS
Video Resolution 720 x 480 (NTSC) / 720 x 576 (PAL)
Viewing Angle 170 degrees
Night Vision Yes, 6 IR LEDs
Waterproof Rating IP68
Mounting Type License Plate Mount
Power Supply DC 12V
Video Output RCA Composite
Operating Temperature -20°C to 60°C
Cable Length 1.5 m
Housing Material Aluminum Alloy
Color Black
Dimensions 260 x 50 x 30 mm
Weight 300 g
Adjustable Angle Yes
Parking Guide Lines Yes, adjustable
Compatibility Universal with RCA input

Frequently Asked Questions - PLCMTR104 Pyle

How do I install the Pyle PLCMTR104 rear camera?
Mount the camera to your license plate using the supplied bracket. Connect the red power wire to the positive terminal of your reverse light and the black wire to ground. Route the RCA video cable from the camera to your monitor's reverse input. Finally, test by shifting into reverse.
Is the camera waterproof?
Yes, the PLCMTR104 has an IP68 waterproof rating, meaning it is fully protected against dust and can be submerged in water. It is safe to install outdoors on your vehicle.
What power supply does the camera need?
The camera operates on DC 12V, which is the standard for most vehicles. You can tap into the wiring of your reverse light or use a dedicated 12V adapter.
Can I use it at night?
Yes, the camera is equipped with 6 built-in IR LEDs that provide clear visibility in low-light or dark conditions, allowing you to see up to 10 meters behind your vehicle.
What is the viewing angle?
The camera offers a 170-degree wide-angle view, which gives you a broad field of vision behind your car, minimizing blind spots.
How do I connect it to my existing monitor?
The camera outputs a composite RCA video signal. Simply plug the included RCA cable into the video input of your aftermarket monitor or receiver.
Does this camera have parking guidance lines?
Yes, the PLCMTR104 features adjustable parking guide lines that can be turned on or off to help you gauge distance when parking.
What is the image quality like?
The camera uses a 1/3-inch CMOS sensor that delivers sharp color reproduction with a resolution of 720x480 (NTSC) or 720x576 (PAL). It also has automatic white balance to adjust to lighting conditions.
Can I install this camera on any vehicle?
The universal license plate mount and connector ensure compatibility with most cars, SUVs, pickups, and vans. The adjustable angle helps focus on the area behind your vehicle.
What is the cable length included?
The package includes a 1.5-meter (approx. 5 feet) RCA cable. For longer routing, you can use standard extension cables that are widely available.

User questions about PLCMTR104 Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Rear Camera in PDF format for free! Find your manual PLCMTR104 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLCMTR104 by Pyle.

USER MANUAL PLCMTR104 Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PLCMTR104

Category : Rear Camera