PLCMTR5 - Rear Camera Pyle - Free user manual and instructions
Find the device manual for free PLCMTR5 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear View Camera |
| Brand | Pyle |
| Model | PLCMTR5 |
| Mounting Location | License plate mount |
| Image Sensor | 1/4" Color CMOS |
| Resolution | 480 TV lines |
| Viewing Angle | 120 degrees |
| Night Vision | 6 built-in IR LEDs for low-light visibility |
| Waterproof Rating | IP68 |
| Video Output | Composite video (1Vp-p 75 Ohm) |
| Power Supply | DC 12V |
| Current Consumption | <100mA |
| Operating Temperature | -20°C to +70°C |
| Dimensions (approx.) | 2.5 x 1.2 x 1.0 inches |
| Weight (approx.) | 0.2 lbs |
| Care and Cleaning | Wipe the lens with a soft, dry cloth |
| Safety Warning | Ensure proper insulation of connections |
| Spare Parts and Repairability | No user-serviceable parts; contact a qualified technician |
Frequently Asked Questions - PLCMTR5 Pyle
How do I install the PLCMTR5 backup camera?
Mount the camera to your license plate using the included brackets and screws. Connect the yellow RCA video cable to your monitor, and wire the red power lead to the reverse light circuit for automatic activation.
Is the camera waterproof?
Yes, the PLCMTR5 features an IP68 waterproof housing, making it safe to mount in exterior locations such as the rear license plate area.
What video output does it have?
The camera provides a composite video output (1Vp-p 75 Ohm) via a standard RCA connector, compatible with most aftermarket monitors.
Can I use this camera at night?
Yes, it includes 6 infrared LEDs that provide night vision, allowing clearly visible images even in low-light conditions.
How do I connect the camera to my vehicle's reverse light?
Locate the reverse lamp positive wire in the tail light assembly, splice the camera's red power wire to it, and connect the black wire to ground. The camera will power on automatically when you shift into reverse.
The image is upside down, what can I do?
Some Pyle monitors have a mirror/image flip setting. Check your monitor's setup menu. Alternatively, you can physically rotate the camera if it is mounted with the bracket upside down.
What power source is required?
The camera operates on DC 12V with a current draw of less than 100mA, making it compatible with all vehicle electrical systems.
Does the camera come with mounting hardware?
Yes, the package includes mounting brackets and screws designed specifically for license plate installation.
How do I clean the camera lens?
Use a soft, dry cloth to gently wipe the lens. Avoid harsh chemicals or abrasive materials that could scratch the glass.
What should I do if the camera does not show an image?
First, verify that the power and video connections are secure. Check the fuse and test the reverse light circuit. If the problem persists, the camera may be defective; contact Pyle support.
User questions about PLCMTR5 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rear Camera in PDF format for free! Find your manual PLCMTR5 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLCMTR5 by Pyle.
USER MANUAL PLCMTR5 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLCMTR5
Category : Rear Camera