KLT-30DS - Kettle Blodgett - Free user manual and instructions
Find the device manual for free KLT-30DS Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tilting Steam Jacketed Kettle |
| Brand | Blodgett |
| Model | KLT-30DS |
| Capacity | 30 Gallons (approximately) |
| Heating Method | Direct steam (steam jacket) |
| Construction Material | Stainless steel interior and exterior |
| Tilting Mechanism | Manual tilt with gear-driven worm and wheel assembly |
| Temperature Range | Up to 298°F (depending on steam supply pressure) |
| Safety Features | Pressure relief valve, safety tilt latch, insulated jacket |
| Drain System | Full-port lever-operated drain valve |
| Mounting | Stainless steel legs with adjustable bullet feet |
| Approximate Dimensions | 30" W x 32" D x 40" H |
| Approximate Shipping Weight | 350 lbs |
| Cleaning Instructions | Wipe with mild detergent and water; avoid abrasive cleaners |
| Maintenance Requirements | Periodically inspect relief valve and steam jacket for leaks |
| Spare Parts Availability | Genuine parts available through Blodgett authorized distributors |
| Warranty | 1-year limited parts and labor warranty |
| Certifications | NSF, UL, CSA listed |
Frequently Asked Questions - KLT-30DS Blodgett
How do I tilt the kettle safely?
To tilt the kettle, disengage the tilt safety latch, then turn the hand wheel clockwise to pour. Always ensure the kettle is not overfilled and the steam supply is shut off before tilting.
What steam pressure is required for the KLT-30DS?
The kettle operates with a direct steam supply. The recommended pressure is typically between 25 and 40 PSI, but the specific rating is indicated on the nameplate. Use a pressure regulating valve to avoid exceeding the maximum rated pressure.
How often should I clean the kettle?
Clean the kettle after each use. Once the kettle has cooled, drain any remaining product and rinse with warm water. Use a soft cloth or sponge with a mild detergent, then rinse thoroughly. Do not use steel wool or abrasive pads that can damage the stainless steel surface.
What does the pressure relief valve do?
The pressure relief valve is a safety device that automatically releases excess steam pressure to prevent dangerous pressure buildup in the jacket. Inspect it regularly and test it at least once a month to ensure it is not clogged or stuck.
Can I use the kettle without a steam supply?
No, the KLT-30DS is designed for direct steam heating only. Operating without a proper steam supply will not heat the kettle and may damage the control components. Ensure the steam supply line is connected and properly valved before use.
How do I replace the drain valve seal?
To replace the drain valve seal, first disconnect the steam supply and allow the kettle to cool. Remove the valve handle hardware and pull out the valve stem. Take out the old seal and replace it with a compatible high-temperature silicone or PTFE seal. Reassemble and test for leaks.
Is the Blodgett KLT-30DS NSF certified?
Yes, the KLT-30DS is NSF listed, meaning it meets food safety and sanitation standards. This makes it suitable for use in commercial foodservice kitchens.
How can I level the kettle on an uneven floor?
The kettle is equipped with adjustable bullet feet on each leg. Loosen the locking nut, turn the foot to raise or lower the corner, and then tighten the nut. Use a level placed on the kettle rim to verify horizontal alignment.
What does the limited warranty cover?
The 1-year limited warranty covers defects in material and workmanship under normal use and service. It includes replacement parts and labor for repair by an authorized Blodgett service provider. It does not cover damage from misuse, improper cleaning, or unauthorized modifications.
How do I remove hard water deposits inside the kettle?
For hard water scale, fill the kettle with a mixture of water and a commercial descaling solution safe for stainless steel (or a 1:1 vinegar-water mix). Heat lightly if possible, let it soak for 30-60 minutes, then scrub with a non-abrasive pad and rinse thoroughly. Repeat as needed.
User questions about KLT-30DS Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kettle in PDF format for free! Find your manual KLT-30DS - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KLT-30DS by Blodgett.
USER MANUAL KLT-30DS Blodgett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blodgett
Model : KLT-30DS
Category : Kettle