GV-BLFC5800 - Security Camera Geovision - Free user manual and instructions
Find the device manual for free GV-BLFC5800 Geovision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Geovision |
| Model | GV-BLFC5800 |
| Image Sensor | 5MP CMOS |
| Maximum Resolution | 2560 x 1920 pixels |
| Lens Type | Fixed lens, 4mm focal length |
| Night Vision | Built-in IR LEDs with 30m range |
| Weatherproof Rating | IP67 rated for outdoor use |
| Power Supply | DC 12V or PoE (IEEE 802.3af) |
| Power Consumption | Max 10W |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 20fps at full resolution |
| Field of View | 80° horizontal angle |
| Dimensions | Approx. 70mm x 70mm x 180mm |
| Weight | Approx. 500g |
| Operating Temperature | -30°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Main Functions | Motion detection, privacy masking, two-way audio, microSD card slot |
| Connectivity | 10/100 Mbps Ethernet, USB port for storage |
| Mounting | Wall or ceiling mount with included bracket |
| Maintenance and Cleaning | Clean the lens and housing with a soft dry cloth; avoid direct high-pressure water |
| Safety Features | Overcurrent and surge protection |
| Spare Parts and Repairability | Professional installation required; spare parts available through Geovision support |
| General Information | ONVIF compliant, supports GeoVision software integration |
Frequently Asked Questions - GV-BLFC5800 Geovision
How do I install the GV-BLFC5800 security camera?
To install the camera, first mount the bracket to the wall or ceiling using the provided screws. Then attach the camera body to the bracket and adjust the angle for optimal viewing. Connect the Ethernet cable for network access or a 12V DC power supply if not using PoE. Finally, use the GeoVision software or a web browser to configure the camera settings.
What is the recommended mounting height for a bullet camera?
For optimal coverage, mount the camera at a height of 3 to 5 meters. This provides a wide field of view while keeping the camera out of easy reach to prevent tampering. Adjust the angle to avoid glare and ensure the area of interest is well framed.
Does the camera support Power over Ethernet (PoE)?
Yes, the GV-BLFC5800 supports PoE (IEEE 802.3af). This allows you to power the camera and transmit data over a single Ethernet cable, simplifying installation. If your network switch does not support PoE, you can use a PoE injector or a 12V DC adapter.
How do I access the camera remotely?
To access the camera remotely, first ensure it is connected to your local network. Then configure port forwarding on your router for the camera's IP address. Use the GeoVision software or mobile app to connect via the public IP or a dynamic DNS service. For security, enable HTTPS and set a strong password.
What memory card is compatible with the microSD slot?
The camera accepts microSD/SDHC/SDXC cards up to 256GB. It is recommended to use a high-endurance card rated for continuous recording, such as those from SanDisk or Kingston. Insert the card into the slot before powering on the camera to ensure proper recognition.
How do I reset the camera to factory settings?
To reset the camera, press and hold the reset button located near the power connection for about 10 seconds. The camera will reboot and restore default settings. Alternatively, you can reset it via the web interface under Maintenance > Factory Default, which will also clear all custom configurations.
Can I use the camera outdoors?
Yes, the GV-BLFC5800 is designed for outdoor use with an IP67 weatherproof rating. It is protected against dust and temporary immersion in water. Ensure all cable connections are properly sealed with waterproof connectors to maintain this protection.
What is the IR range and how does night vision work?
The camera has a 30-meter IR range. In low-light conditions, the camera automatically switches to night mode, activating the built-in IR LEDs to illuminate the scene. The black-and-white image is captured by the sensor, allowing to see in complete darkness within that range.
How do I clean the camera lens properly?
Use a soft, dry microfiber cloth to gently wipe the lens cover. For stubborn dirt, slightly dampen the cloth with water or a mild alcohol solution, but avoid spraying directly on the camera. Do not use abrasive materials or strong chemicals, as they can damage the lens and housing.
Is the camera compatible with third-party software?
Yes, the camera is ONVIF compliant, which allows it to work with many third-party VMS systems like Milestone, Blue Iris, and Synology Surveillance Station. It also supports standard RTSP streams for integration with custom applications. Check the ONVIF profile settings on the camera and configure accordingly.
User questions about GV-BLFC5800 Geovision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual GV-BLFC5800 - Geovision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GV-BLFC5800 by Geovision.
USER MANUAL GV-BLFC5800 Geovision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Geovision
Model : GV-BLFC5800
Category : Security Camera