NDS-6006 - Loudspeaker Naxa - Free user manual and instructions
Find the device manual for free NDS-6006 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wireless Bluetooth speaker |
| Brand | Naxa |
| Model | NDS-6006 |
| Dimensions (L × W × H) | 6.5 × 3.0 × 3.0 in (16.5 × 7.6 × 7.6 cm) |
| Weight | 1.2 lbs (0.55 kg) |
| Power source | Built-in rechargeable battery (USB charging cable included) |
| Battery life | Up to 6 hours at moderate volume |
| Charging time | 2–3 hours |
| Connectivity | Bluetooth 5.0, AUX-in 3.5 mm |
| Wireless range | Up to 33 ft (10 m) |
| Output power | 5 W RMS |
| Frequency response | 100 Hz – 20 kHz |
| Speaker driver | 1 x 2.5 inch full-range driver |
| Controls | Power, volume, play/pause, track skip, hands-free speakerphone |
| Hands-free calling | Built-in microphone |
| Protection | Short-circuit and overcharge protection |
| Cleaning | Wipe gently with a dry cloth |
| Safety warning | Keep away from water and high temperatures |
| Spare parts | Replacement charging cable available; internal battery not user-replaceable |
| Repairability | Contact Naxa support for service options |
| Package contents | Speaker, USB cable, AUX cable, user manual |
Frequently Asked Questions - NDS-6006 Naxa
How do I turn on/off the Naxa NDS-6006?
Press and hold the power button until the indicator light turns on or off.
How do I pair the speaker with my phone?
Turn on the speaker, activate Bluetooth on your phone, and select "NDS-6006" from the list of available devices.
Can I use the speaker while charging?
Yes, the speaker can be charged and used simultaneously.
What is the AUX-in port for?
The 3.5mm AUX-in port lets you connect non-Bluetooth devices (e.g., MP3 players) with an audio cable.
How do I answer incoming calls?
Press the call button on the speaker to answer or end a call. The built-in microphone enables hands-free conversation.
How do I reset or restart the speaker?
Press and hold the power button for about 10 seconds until the speaker powers off, then turn it back on.
How do I know when the battery is low?
The LED indicator may flash or the speaker will emit a low-battery alert before shutting down.
Can I pair two NDS-6006 speakers together for stereo sound?
No, this model supports single speaker playback only. TWS pairing is not available.
What should I do if there is no sound?
Check that the volume is turned up on both the speaker and the connected device, and that the device is correctly paired. Try re-pairing or connecting via AUX instead.
How do I charge the speaker?
Connect the included USB cable to a 5V power adapter or a computer USB port. The charging indicator will show when the battery is charging.
User questions about NDS-6006 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual NDS-6006 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NDS-6006 by Naxa.
USER MANUAL NDS-6006 Naxa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Naxa
Model : NDS-6006
Category : Loudspeaker