Sound Pro NDS-1011 - Loudspeaker Naxa - Free user manual and instructions
Find the device manual for free Sound Pro NDS-1011 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | Naxa |
| Model | Sound Pro NDS-1011 |
| Dimensions | 7.5 x 3.0 x 3.0 inches (19.0 x 7.6 x 7.6 cm) |
| Weight | 0.55 lbs (250 g) |
| Power Source | Built-in rechargeable lithium-ion battery |
| Battery Capacity | 1200 mAh |
| Playback Time | Up to 6 hours at moderate volume |
| Charging Time | Approximately 2-3 hours via USB |
| Connectivity | Bluetooth 5.0, 3.5mm AUX-in |
| Wireless Range | Up to 33 ft (10 m) |
| Output Power | 5W RMS |
| Frequency Response | 20 Hz - 20 kHz |
| Driver Size | 52 mm full-range driver |
| Impedance | 4 ohms |
| Built-in Microphone | Yes, for hands-free calling |
| Controls | Power button, volume controls, play/pause, call answer/end |
| Charging Port | Micro USB |
| Included Accessories | Micro USB charging cable, 3.5mm AUX cable, user manual |
| Safety Features | Overcharge protection, short-circuit protection |
| Care & Maintenance | Wipe with a soft dry cloth; keep away from water and extreme heat |
| Spare Parts & Repairability | Replacement parts available through Naxa customer service |
| General Information | Compatible with smartphones, tablets, and other Bluetooth devices |
Frequently Asked Questions - Sound Pro NDS-1011 Naxa
How do I pair the Naxa Sound Pro NDS-1011 with my phone?
Turn on the speaker and press the Bluetooth button until the indicator flashes. On your phone, enable Bluetooth and search for "NDS-1011". Select it to pair. The speaker will confirm with a sound.
How do I charge the speaker?
Connect the included Micro USB cable to the charging port and a USB power adapter or computer. The LED indicator will light up while charging and turn off when fully charged. A full charge takes about 2-3 hours.
Why is my speaker not turning on?
Make sure the battery is not completely drained. Charge the speaker for at least 30 minutes, then press and hold the power button for 3 seconds.
Can I connect the speaker via an AUX cable?
Yes, insert a 3.5mm AUX cable into the AUX-in port and the other end to your device. Press the AUX/Bluetooth button to switch to AUX mode. The speaker will automatically detect the cable.
Is the speaker waterproof?
No, the Naxa Sound Pro NDS-1011 is not waterproof. Keep it away from moisture and liquids to avoid damage. For outdoor use, place it in a dry location.
Can I use the speaker while it is charging?
Yes, you can play music while charging. However, it is recommended to unplug it once fully charged to preserve battery lifespan.
How do I reset the speaker?
If the speaker becomes unresponsive, press and hold the power button and the Bluetooth button together for 5 seconds. This will reset the connection and restore factory settings.
Does the speaker have a built-in microphone?
Yes, the built-in microphone allows you to answer phone calls hands-free. Press the call button to accept or end a call, and hold it to reject an incoming call.
What is the wireless range of the speaker?
The Bluetooth 5.0 connection provides a stable range of up to 33 feet (10 meters) without obstacles. Walls and interference may reduce the range.
How should I clean and maintain the speaker?
Wipe the exterior with a soft, dry cloth. Avoid using water, solvents, or abrasive cleaners. Keep the speaker away from dust, high humidity, and direct sunlight to ensure long-lasting performance.
User questions about Sound Pro NDS-1011 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Sound Pro NDS-1011 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sound Pro NDS-1011 by Naxa.