PLDAND697 - Subwoofer Pyle - Free user manual and instructions
Find the device manual for free PLDAND697 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer Speaker |
| Brand | Pyle |
| Model | PLDAND697 |
| Speaker Size | 6.5 inches |
| Peak Power Handling | 800 Watts |
| RMS Power Handling | 200 Watts |
| Impedance | 4 Ohms |
| Voice Coil | Dual voice coil with 4 Ohm wiring options |
| Frequency Response | 40 Hz to 3 kHz |
| Sensitivity | 89 dB |
| Cone Material | Polypropylene with rubber surround |
| Magnet Type | High-powered ferrite magnet |
| Mounting Depth | 3.1 inches |
| Mounting Cutout Diameter | 5.5 inches |
| Product Dimensions (H x W x D) | 6.5 x 7.1 x 6.2 inches |
| Weight | 4.2 lbs |
| Recommended Enclosure Volume | Sealed: 0.3 cu ft; Ported: 0.5 cu ft |
| Power Source | Compatible with standard car audio amplifiers |
| Maintenance and Cleaning | Gently wipe with a soft, dry microfiber cloth |
| Safety Precautions | Mount securely and disconnect power before handling |
| Spare Parts and Repairability | Replacement surrounds and leads available for service |
| General Information | Designed for demanding car audio bass reproduction |
Frequently Asked Questions - PLDAND697 Pyle
What is the peak power handling of the Pyle PLDAND697?
The Pyle PLDAND697 handles up to 800 Watts peak power, with a continuous RMS rating of 200 Watts.
What are the main speaker specifications?
This 6.5 inch subwoofer has a 4 Ohm impedance, a sensitivity of 89 dB, and a response range of 40 Hz to 3 kHz.
What type of enclosure should I use?
Use a sealed enclosure of 0.3 cubic feet or a ported enclosure of 0.5 cubic feet for the best bass performance.
How do I wire the dual voice coil?
Wire the two coils either in series for a higher impedance or in parallel for a lower impedance, depending on your amplifier's requirement.
How should I clean the subwoofer?
Wipe the cone and rubber surround with a soft dry microfiber cloth. Avoid liquid cleaners, water, and high-pressure air.
What safety steps are important during installation?
Disconnect the vehicle battery before working, secure the subwoofer firmly, and protect wires from sharp edges and heat sources.
Can I replace the surround if it is damaged?
Yes, replacement surround and lead kits can restore the subwoofer when the cone and voice coil are in good condition.
What amplifier power is recommended?
Choose an amplifier that supplies 200 to 400 Watts RMS at the configured impedance to drive the subwoofer safely.
What is the frequency response used for?
The response from 40 Hz to 3 kHz lets the subwoofer produce deep bass and blend with midrange speakers in the car.
Is the PLDAND697 suitable for compact installations?
Yes, its shallow mounting depth of 3.1 inches and 6.5 inch cone make it a solid choice for doors, under seats, and small custom enclosures.
User questions about PLDAND697 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual PLDAND697 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLDAND697 by Pyle.
USER MANUAL PLDAND697 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLDAND697
Category : Subwoofer