PLMW36 - Subwoofer Pyle - Free user manual and instructions
Find the device manual for free PLMW36 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Subwoofer |
| Brand | Pyle |
| Model | PLMW36 |
| Speaker Size | 3.5 inches |
| Peak Power Handling | 200 Watts |
| RMS Power Handling | 100 Watts |
| Impedance | 4 Ohms |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 88 dB |
| Magnet Weight | 15 oz |
| Voice Coil Diameter | 1 inch |
| Cone Material | Polypropylene |
| Surround Material | Rubber |
| Mounting Depth | 2.05 inches |
| Mounting Hole Diameter | 2.95 inches |
| Grille Included | Yes |
| Waterproof Rating | IPX6 |
| Recommended Enclosure | Sealed or Ported |
| Weight | 1.5 lbs |
| Dimensions (WxHxD) | 4.13 x 4.13 x 2.6 inches |
Frequently Asked Questions - PLMW36 Pyle
What is the recommended amplifier power for the PLMW36?
We recommend an amplifier that delivers 100 Watts RMS at 4 Ohms to match the subwoofer's RMS rating.
How do I properly break in the subwoofer?
Play the subwoofer at low volume for 10-20 hours with music that contains moderate bass content to allow the suspension to loosen.
Can I use this subwoofer in a sealed enclosure?
Yes, the PLMW36 works well in a sealed enclosure (0.1-0.2 cu ft) for accurate bass response.
Is the subwoofer fully waterproof?
It has an IPX6 rating, meaning it is protected against powerful water jets, but not meant for full submersion.
What is the impedance of this subwoofer?
The impedance is 4 Ohms, which is compatible with most marine amplifiers.
Does the PLMW36 come with a grille?
Yes, a protective grille is included to safeguard the driver from debris.
What type of wiring does the subwoofer use?
It has 2-way binding posts for secure and easy connection.
Can I use it in a ported enclosure?
Yes, a ported enclosure (0.2-0.3 cu ft tuned to 35 Hz) can increase efficiency and output.
How deep is the mounting depth?
The mounting depth is 2.05 inches, allowing installation in shallow locations.
What is the frequency response range?
It covers 60 Hz to 20 kHz, providing solid bass and clear high frequencies for a subwoofer.
User questions about PLMW36 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual PLMW36 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMW36 by Pyle.
USER MANUAL PLMW36 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLMW36
Category : Subwoofer