MBR1200 - Router NETGEAR - Free user manual and instructions
Find the device manual for free MBR1200 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Netgear |
| Model | MBR1200 |
| Network Type | 4G LTE |
| Wi-Fi Standard | IEEE 802.11n (2.4 GHz) |
| Maximum Wi-Fi Speed | 300 Mbps |
| Ethernet Ports | 2 x 10/100 Mbps LAN |
| WAN Ports | 1 x 10/100 Mbps Ethernet WAN |
| USB Port | 1 x USB 2.0 |
| Antenna | 2 external detachable |
| Firewall Features | NAT, SPI firewall |
| Wireless Security | WEP, WPA, WPA2 |
| SIM Card Slots | 1 x Micro SIM |
| Power Supply | 12V DC, 1.5A adapter |
| Power Consumption | Less than 10W (max) |
| Dimensions (W x D x H) | 218 x 152 x 39 mm |
| Weight | 0.5 kg |
| LED Indicators | Power, Internet, LAN, WLAN, LTE |
| Management | Web browser interface |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20 to 70°C |
| Humidity | 5%-95% non-condensing |
Frequently Asked Questions - MBR1200 NETGEAR
How to set up my Netgear MBR1200?
Connect to your router via Ethernet or Wi-Fi, open a web browser, and go to www.routerlogin.net to access the setup wizard. Follow the on-screen instructions to configure your LTE connection.
How to insert a SIM card?
Locate the SIM card slot on the side or back of the router. Insert a micro SIM card into the slot until it clicks, then connect the power adapter.
Why is my internet connection slow?
Check the signal strength indicator. Move the router to a better location or adjust the antennas. Ensure that no obstructions interfere with the LTE signal.
How to change the Wi-Fi password?
Login to the router interface, go to Wireless settings, and change the Network Key. Use WPA2 for better security.
Can I use the MBR1200 as a wired router?
Yes, you can use the Ethernet LAN ports to connect wired devices. The router provides both Wi-Fi and wired connections.
How to reset to factory defaults?
Use a paperclip to press the reset button located on the back of the router for 5 seconds until the lights blink. This will restore all settings.
What is the default login?
The default username is 'admin' and the default password is 'password'. You should change it to protect your network.
How to update the router firmware?
Download the latest firmware from the Netgear support website. Then upload it via the router's web interface under Advanced > Firmware Update.
How does the router manage failover between LTE and wired WAN?
The MBR1200 can automatically switch to a wired internet connection if the LTE connection fails. This can be configured in the 'WAN Settings' section.
Is this router compatible with my internet provider?
It works with any 4G LTE network. Check your provider's frequency bands. The MBR1200 supports bands common in your region.
User questions about MBR1200 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual MBR1200 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBR1200 by NETGEAR.
USER MANUAL MBR1200 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : MBR1200
Category : Router