JWNR2000v1 - Router NETGEAR - Free user manual and instructions
Find the device manual for free JWNR2000v1 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless N150 Router |
| Brand | NETGEAR |
| Model | JWNR2000v1 |
| Ethernet Ports | 4 x 10/100 Fast Ethernet LAN, 1 x 10/100 Fast Ethernet WAN |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Data Rate | 150 Mbps |
| Antenna | 1 external fixed antenna |
| Wireless Security | WEP, WPA, WPA2-PSK |
| Firewall | NAT and Stateful Packet Inspection (SPI) |
| VPN Support | IPSec, PPTP, and L2TP pass-through |
| Dimensions (approx.) | 177 x 130 x 35 mm (6.97 x 5.12 x 1.38 in) |
| Weight | 340 g (0.75 lb) |
| Power Supply | 12 V DC, 0.5 A |
| Power Consumption | Maximum 6 W |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
| Operating Humidity | 90% maximum (non-condensing) |
| LED Indicators | Power, Internet, WLAN, LAN 1-4 |
| Buttons | Reset |
| Cooling | Passive, no fan |
| Cleaning & Maintenance | Disconnect the power and wipe with a dry, soft cloth. Never use liquids or aerosol cleaners. |
| Spare Parts & Repairability | No user-serviceable parts inside; the power adapter and Ethernet cable can be replaced if needed. |
| General Information | Entry-level wireless N150 router designed for home Internet sharing. |
Frequently Asked Questions - JWNR2000v1 NETGEAR
What is the maximum wireless speed of the NETGEAR JWNR2000v1?
The JWNR2000v1 provides a maximum wireless data rate of 150 Mbps on the 2.4 GHz band when paired with an 802.11n adapter.
Does the JWNR2000v1 support the latest WPA3 security?
No, this older N150 router supports WEP, WPA, and WPA2-PSK security protocols, not WPA3.
How many Ethernet devices can I connect directly to the router?
The router has four 10/100 Fast Ethernet LAN ports for wired devices like computers, game consoles, or printers.
Can I use the JWNR2000v1 on a fiber optic connection?
Yes, if your modem or ONT provides an Ethernet output, connect it to the WAN port. The router will share the connection wirelessly and over LAN.
How do I reset the JWNR2000v1 to factory settings?
With the router powered on, use a paperclip to press and hold the Reset button for about 7 seconds until the power LED blinks. Release it and the router reboots with factory defaults.
Does this router include a firewall?
Yes, it has NAT and Stateful Packet Inspection (SPI) firewall features to help protect your local network from unsolicited incoming traffic.
What WAN connection types are supported?
It supports DHCP, static IP, PPPoE, and PPTP/L2TP for connecting to a broadband modem.
Can I create a wireless guest network?
The standard firmware supports one wireless network; advanced guest network support is not included on this model.
What is the maximum number of wireless clients?
In typical home use, the router can handle around 15 to 20 simultaneous wireless clients without major performance issues.
How should I clean and maintain the router?
Unplug the router and wipe the casing with a dry, soft cloth. Avoid liquids and keep the ventilation slots clear of dust.
User questions about JWNR2000v1 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual JWNR2000v1 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JWNR2000v1 by NETGEAR.
USER MANUAL JWNR2000v1 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : JWNR2000v1
Category : Router