HR314 - Router NETGEAR - Free user manual and instructions
Find the device manual for free HR314 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router (Cable/DSL) |
| Brand | NETGEAR |
| Model | HR314 |
| Dimensions (W x D x H) | 192 x 148 x 31 mm |
| Weight | 0.5 kg |
| Power Supply | 12V DC adapter |
| Power Consumption | 9W |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| WAN Port | 1 x 10/100 Mbps Ethernet |
| Ethernet Interface | Fast Ethernet (10/100) |
| DHCP Server | Yes, built-in |
| NAT Firewall | Yes |
| VPN Pass-through | Yes |
| Management | Web-based interface (HTTP) |
| LED Indicators | Power, Status, LAN ports |
| Operating Temperature | 0°C to 40°C |
| Safety | Designed to meet FCC/CE standards |
| Maintenance | Clean external surfaces with a dry, soft cloth |
| Spare Parts | No user-serviceable parts; contact NETGEAR support |
| Repairability | Professional servicing only |
| Warranty | Limited 1-year warranty |
Frequently Asked Questions - HR314 NETGEAR
How do I set up the NETGEAR HR314 router?
Connect your cable or DSL modem to the WAN port. Then connect your computer to one of the LAN ports with an Ethernet cable. Plug in the power adapter and wait for the LEDs to stabilize. Open a web browser and enter 192.168.0.1 to access the setup wizard.
What is the default IP address and password?
The default IP address is 192.168.0.1 and the default password is usually password (all lowercase). For security, change the password after your first login.
How do I reset the router to factory defaults?
Locate the reset button on the back panel. Use a paperclip or similar tool to press and hold it for about 5 seconds until the power LED blinks. The router will reboot with original settings.
How can I update the firmware?
Download the latest firmware for the HR314 from the NETGEAR support website to your computer. Log into the router's web interface, go to the Maintenance or Firmware Upgrade section, browse to the downloaded file, and click Apply. Do not interrupt the process.
Why is my internet connection not working?
Check that all cables are securely connected and the WAN port LED is lit. Verify your internet settings (PPPoE, DHCP, static IP) with your ISP. Also, try rebooting both the modem and router by unplugging them for 30 seconds.
How do I configure DHCP on the router?
By default, DHCP server is enabled and automatically assigns IP addresses to devices on your network. You can adjust the address pool, lease time, and reservations in the LAN Setup section of the web interface.
Is the HR314 secure for my home network?
The HR314 includes a NAT firewall that helps protect your network from external threats. You should also enable content filtering and disable remote management from the WAN interface to improve security. Always use strong passwords for the admin account.
Can I use the HR314 as an Ethernet switch?
Yes, you can use the router as a switch or access point. Disable NAT and DHCP server, then connect a LAN port on the HR314 to the LAN port of your primary router. The remaining LAN ports can then connect wired devices.
What is the maximum number of users supported by this router?
The HR314 is designed for small offices and home networks. It can handle around 10-20 simultaneous users with moderate internet traffic. For larger networks, consider a more advanced model.
Where can I find additional support or the manual?
You can download the user manual from this page or visit the NETGEAR support portal at netgear.com for FAQs, product documentation, and firmware updates.
User questions about HR314 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual HR314 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR314 by NETGEAR.