SF-776SW - Loudspeaker Epcom - Free user manual and instructions
Find the device manual for free SF-776SW Epcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Manufacturer | Epcom |
| Model | SF-776SW |
| Product Type | Loudspeaker |
| Speaker Type | 2-way bass reflex |
| Frequency Response | 60 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 88 dB |
| Maximum Power Handling | 50 W |
| Nominal Power | 20 W |
| Driver Configuration | 1 tweeter, 1 woofer |
| Connectivity | Wired speaker terminals |
| Enclosure Material | MDF wood |
| Cabinet Finish | Black vinyl |
| Dimensions (W x H x D) | 180 x 300 x 220 mm |
| Weight | 2.5 kg per speaker |
| Placement | Bookshelf or stand |
| Recommended Amplifier Power | 20 - 50 W per channel |
| Included Accessories | User manual |
| Cleaning Instructions | Wipe with a soft dry cloth |
| Safety Warning | Keep away from moisture and heat sources |
| Spare Parts & Service | Contact authorized service centers |
| General Information | Designed for home audio use |
Frequently Asked Questions - SF-776SW Epcom
How do I connect the Epcom SF-776SW to an amplifier?
First, turn off the amplifier. Connect the speaker wires to the red and black terminals on both the speaker and the amplifier, ensuring correct polarity. Then turn on the amplifier and adjust the volume.
What is the impedance of this speaker and why is it important?
The impedance is 8 Ohms. This is important because it determines how much current the amplifier needs to deliver. Most home amplifiers support this impedance, but ensure your amplifier is rated for 8 Ohm speakers.
Can I use these speakers outdoors?
No, the SF-776SW is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the drivers and cabinet.
How should I clean the speaker?
Use a soft, dry cloth to gently wipe the cabinet and grille. Do not use chemical cleaners, water, or abrasive materials, as they may damage the finish.
What should I do if there is no sound from the speaker?
Check that the speaker wires are securely connected to both the speaker and the amplifier. Make sure the amplifier is on and the correct input source is selected. Also verify that the wire polarity is not reversed.
Where should I place these speakers for the best sound?
Place the speakers at ear level when seated, about 1-2 meters apart from each other and away from walls to avoid excessive bass reflection. Angle them slightly toward the listening position.
Does the SF-776SW come with a warranty?
Epcom provides a standard manufacturer's warranty. Keep your purchase receipt and contact the retailer or an authorized Epcom service center for warranty claims.
How do I maintain the speaker cones?
Avoid touching the speaker cones as they are delicate. Dust them gently with a soft brush if needed. Keep the grille on to protect the drivers from accidental damage.
Can I connect this speaker to my TV?
Yes, if your TV has speaker outputs or is connected to an amplifier or receiver that can drive external speakers. If your TV only has line-level outputs, you will need an amplifier between the TV and the speakers.
What does 'frequency response' mean for this speaker?
The frequency response of 60 Hz - 20 kHz indicates the range of audio frequencies the speaker can reproduce. Lower is better for bass and higher for treble, covering the typical human hearing range.
User questions about SF-776SW Epcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SF-776SW - Epcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SF-776SW by Epcom.
USER MANUAL SF-776SW Epcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Epcom
Model : SF-776SW
Category : Loudspeaker