SF120DTB - Loudspeaker Epcom - Free user manual and instructions
Find the device manual for free SF120DTB Epcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Loudspeaker |
| Brand | Epcom |
| Model | SF120DTB |
| Power output | 20 W RMS |
| Frequency range | 80 Hz - 20 kHz |
| Impedance | 4 Ω |
| Drivers | 1 x 3.5" (88 mm) woofer, 1 x 1" (25 mm) tweeter |
| Connectivity | Bluetooth 5.0, 3.5 mm AUX input |
| Bluetooth range | Up to 10 m |
| Input power | AC 100-240 V, 50/60 Hz |
| Dimensions (W x H x D) | 220 x 180 x 160 mm |
| Weight | 1.2 kg |
| Enclosure material | MDF wood |
| Signal-to-noise ratio | ≥75 dB |
| Total harmonic distortion | <1% |
| Power supply | Built-in switching adapter |
| Controls | Volume knob, power button, mode button |
| Included accessories | Power cable, user manual, 3.5 mm audio cable |
| Safety certifications | CE, FCC |
| Operating temperature | 0°C to 40°C |
Frequently Asked Questions - SF120DTB Epcom
How do I connect my Epcom SF120DTB to a smartphone via Bluetooth?
Turn on the speaker and press the Bluetooth button until the LED blinks. Then select 'Epcom SF120DTB' from your smartphone's Bluetooth settings. The pairing is complete when the LED stops blinking.
Can I use the speaker with a non-Bluetooth device?
Yes, use the included 3.5 mm AUX cable to connect the speaker directly to the audio output of your device. Make sure the speaker is set to AUX mode.
What is the best way to clean the speaker?
Use a soft, dry cloth to wipe the exterior. Avoid using sprays or liquids. For the speaker grill, use a soft brush or a vacuum cleaner on a low setting to remove dust.
How do I reset the speaker?
Turn off the speaker, unplug the power cable, wait about 10 seconds, then plug it back in and turn it on. This will reset the speaker to its factory default state.
Is the speaker compatible with voice assistants?
The SF120DTB does not have a built-in microphone, so it cannot directly interact with voice assistants. However, you can connect it to a Bluetooth device that has assistant support and use it as an audio output.
What is the standby power consumption?
In standby mode, the speaker consumes approximately 0.5 W of power. To save energy, unplug the speaker if it will not be used for an extended period.
How do I mount the speaker on a wall?
The speaker does not come with wall mount brackets. You can use a universal speaker shelf or a mount designed for speakers of this size. Ensure the mounting surface is secure and the speaker is safely positioned.
What should I do if there is no sound?
Check the volume level on both the speaker and the connected device. Make sure the correct input (Bluetooth or AUX) is selected. Try using a different cable or device to isolate the issue.
Can I connect two SF120DTB speakers together for stereo sound?
No, the SF120DTB does not support wireless daisy-chaining. For a true stereo setup, connect two speakers using an AUX Y-splitter cable and play the same audio source through them.
How long is the included power cable?
The included power cable is approximately 1.5 meters long, which provides flexibility for placement near a standard wall outlet.
User questions about SF120DTB Epcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SF120DTB - Epcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SF120DTB by Epcom.
USER MANUAL SF120DTB Epcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Epcom
Model : SF120DTB
Category : Loudspeaker