EC-801 - Measurement Epcom - Free user manual and instructions
Find the device manual for free EC-801 Epcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Digital Multimeter |
| Model | EC-801 |
| Brand | Epcom |
| Dimensions | 150 × 70 × 30 mm (approx.) |
| Weight | 200 g (including batteries) |
| Power supply | 2 × 1.5V AAA batteries |
| Display | LCD, 3 1/2 digits (2000 counts) |
| AC voltage range | 200 mV to 600 V |
| DC voltage range | 200 mV to 600 V |
| AC current range | 200 µA to 10 A |
| DC current range | 200 µA to 10 A |
| Resistance range | 200 Ω to 20 MΩ |
| Capacitance measurement | Yes, up to 200 µF |
| Frequency measurement | Yes, up to 200 kHz |
| Diode test | Yes |
| Continuity test | Yes, with audible beep |
| Auto-ranging | Yes |
| Data hold | Yes |
| Relative measurement | Yes |
| Low battery indicator | Yes |
| Safety rating | CAT II 600V, CAT III 300V |
| Included accessories | Test leads, batteries, manual |
| Maintenance | Clean with dry cloth; replace batteries when low |
| Spare parts availability | Test leads, fuses (if applicable) |
| User manual language | English (downloadable PDF) |
Frequently Asked Questions - EC-801 Epcom
How do I measure DC voltage with the Epcom EC-801?
Set the rotary switch to the V⎓ position. Connect the black lead to COM and red lead to VΩmA. Touch the probes to the circuit. Read the value on the LCD.
How do I test continuity?
Turn the dial to the continuity symbol (usually a diode or speaker icon). Place the probes across the circuit. A beep indicates continuity below a certain threshold (typically < 50 Ω).
How do I replace the batteries?
Remove the screw from the back cover. Slide off the cover. Replace the two AAA batteries observing polarity. Replace the cover and tighten the screw.
Why does the display show 'OL'?
OL stands for Over Load, meaning the measured value exceeds the selected range. Switch to a higher range or use auto-range if available.
Can I measure AC current?
Yes, set the dial to AC A (or ACA) and select the appropriate range. Connect the leads in series with the load. Do not exceed the maximum rated current (10 A for short periods).
What does 'NCV' mean?
NCV stands for Non-Contact Voltage detection. If your model has this feature, you can detect live AC voltage without touching wires. The meter beeps and the indicator lights up near a live conductor.
How do I measure capacitance?
Set the dial to the capacitance symbol (usually -|(-). Discharge the capacitor first. Insert the capacitor into the dedicated input or use the leads. Wait for a stable reading.
Is the EC-801 auto-ranging?
Yes, the Epcom EC-801 features auto-ranging for most measurements. You can also manually select ranges using the RANGE button if needed.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press again to release.
Where can I download the full user manual?
Visit notice-facile.com or the manufacturer's website. Search for model EC-801 Epcom and download the PDF manual in English.
User questions about EC-801 Epcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual EC-801 - Epcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EC-801 by Epcom.
USER MANUAL EC-801 Epcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Epcom
Model : EC-801
Category : Measurement