PLHA-001 - Saw Ozito - Free user manual and instructions
Find the device manual for free PLHA-001 Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Circular Saw |
| Brand | Ozito |
| Model | PLHA-001 |
| Power Source | 240V ~ 50Hz AC |
| Motor Power | 1200W |
| No-Load Speed | 4500 min⁻¹ |
| Blade Diameter | 184mm |
| Blade Bore | 20mm |
| Max Cutting Depth at 90° | 65mm |
| Max Cutting Depth at 45° | 42mm |
| Bevel Adjustment | 0° to 45° |
| Weight | 4.1kg |
| Product Dimensions | 290 x 225 x 255mm |
| Safety Features | Retractable blade guard, lock-off switch, double insulation |
| Cutting Capacity | Suitable for ripping, cross-cutting, and mitre cuts |
| Maintenance | Clean sawdust with brush, sharpen or replace blade, check carbon brushes |
| Spare Parts Available | Blade, carbon brushes, base plate, screws |
| Reparability | Wear parts can be replaced by opening the housing |
| Cable Length | 2m |
| Included Accessories | Blade, rip fence, spanner, dust extraction adapter |
Frequently Asked Questions - PLHA-001 Ozito
What is the maximum cutting depth of the Ozito PLHA-001?
The maximum cutting depth is 65mm at 90° and 42mm at 45°.
Can I use the saw for cutting metal?
The saw is designed primarily for wood and wood-based materials. To cut metal, you must use a suitable metal-cutting blade and reduce the feed rate to avoid overheating.
How do I replace the blade on the PLHA-001?
First unplug the saw. Press the spindle lock to secure the blade, then use the provided spanner to loosen the bolt. Remove the outer flange and old blade, place the new blade with teeth pointing forward, and retighten the bolt firmly.
What safety precautions should I take when using this saw?
Always wear safety glasses and ear protection, keep hands clear of the blade, ensure the blade guard moves freely, and never operate the saw with the guard disabled. Unplug the tool before changing accessories or making adjustments.
How do I adjust the bevel angle on the PLHA-001?
Loosen the bevel adjustment knob located at the front of the base. Tilt the base to the desired angle using the scale (0° to 45°), then tighten the knob securely.
How can I connect a dust extractor to the saw?
The saw includes a dust extraction adapter that fits onto the rear outlet. Slide a vacuum hose onto the adapter and secure it with a hose clamp for efficient dust removal.
Does the saw come with a rip fence for straight cuts?
Yes, a rip fence is included. Attach it to the base plate and slide it to the desired width for accurate, straight cuts parallel to the edge.
What maintenance does the PLHA-001 require?
Regularly clean sawdust from the motor vents and blade area. Keep the blade sharp and replace it if worn. Inspect carbon brushes every 50 hours of use and replace them when worn down to 6mm.
Why does the saw stop during operation?
The motor has overload protection. If it stops, release the trigger, allow the saw to cool for a few minutes, and reduce cutting pressure when restarting. Also check the power cord for damage.
Where can I find spare parts for this saw?
Spare parts such as blades, carbon brushes, and base plates are available from Ozito service centers and authorized dealers. You can also order them online through the official Ozito spare parts portal.
User questions about PLHA-001 Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual PLHA-001 - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLHA-001 by Ozito.
USER MANUAL PLHA-001 Ozito
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ozito
Model : PLHA-001
Category : Saw