TSB-0808U - Saw Ozito - Free user manual and instructions
Find the device manual for free TSB-0808U Ozito in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tile Saw |
| Model | TSB-0808U |
| Brand | Ozito |
| Power Input | 800 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| No-Load Speed | 2950 rpm |
| Blade Diameter | 180 mm |
| Arbor Size | 20 mm |
| Max Cutting Depth | 45 mm |
| Max Bevel Cut | 45° |
| Table Size | 400 x 300 mm |
| Water Pump Included | Yes, submersible pump |
| Laser Guide | Yes, on/off switch |
| Weight | 8.5 kg |
| Dimensions | 600 x 400 x 350 mm |
| Safety Features | Blade guard, splash guard, thermal overload protection |
| Maintenance | Clean water tank regularly, check blade wear, lubricate moving parts |
| Spare Parts | Replacement blades, water pump, carbon brushes, arbor flange |
| Warranty | 2 years (domestic use) |
Frequently Asked Questions - TSB-0808U Ozito
What type of blade does the TSB-0808U use?
The saw uses a 180 mm diameter diamond blade with a 20 mm arbor. Ensure the blade is designed for wet cutting of tiles.
How do I adjust the cutting depth?
Loosen the depth adjustment knob, raise or lower the blade guard to the desired depth, then tighten the knob. The maximum cutting depth is 45 mm.
Can I make bevel cuts with this saw?
Yes, the table tilts up to 45° for bevel cuts. Loosen the bevel lock, tilt the table to the desired angle, and tighten the lock.
How do I use the water pump?
Fill the water tank with clean water, submerge the pump, and plug it into the saw's power outlet. The pump automatically supplies water to the blade during cutting.
The blade does not spin when I press the switch. What should I check?
Ensure the saw is plugged in and the power outlet is working. Check if the thermal overload protection has tripped; let the saw cool down and reset by pressing the reset button. Also inspect the carbon brushes for wear.
How do I replace the blade?
Disconnect the saw from power. Remove the blade guard, use the spindle lock to hold the arbor, then loosen the arbor nut with the provided wrench. Replace the blade and reassemble.
Is the saw suitable for cutting glass tiles?
Yes, with the appropriate diamond blade designed for glass. Ensure proper water cooling to avoid cracking.
How often should I clean the water tank?
After each use, empty the water tank and rinse it to prevent sediment buildup. Clean the pump filter regularly for optimal performance.
What safety precautions should I take?
Always wear safety goggles and hearing protection. Keep hands away from the blade. Use the push stick for small pieces. Ensure the water pump is working to cool the blade.
Where can I find spare parts?
Spare parts are available from Ozito service centers or authorized dealers. Common parts include blades, water pump, carbon brushes, and arbor flanges.
User questions about TSB-0808U Ozito
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual TSB-0808U - Ozito and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TSB-0808U by Ozito.
USER MANUAL TSB-0808U Ozito
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ozito
Model : TSB-0808U
Category : Saw