WNDAP380R - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WNDAP380R NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual Band Wireless Access Point |
| Brand | NETGEAR |
| Model | WNDAP380R |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Frequency Band | 2.4 GHz and 5 GHz simultaneous |
| Maximum Data Rate | Up to 300 Mbps on each band |
| MIMO Configuration | 3 x 3 MIMO with antenna diversity |
| Ethernet Interface | 1 x 10/100/1000 Mbps Gigabit Ethernet port |
| Power over Ethernet | IEEE 802.3af PoE compatible |
| Power Supply | 12V DC 1A external adapter included |
| Number of SSIDs | Up to 16 wireless networks per radio |
| Security Modes | WEP, WPA, WPA2, 802.1X with RADIUS |
| Wireless Encryption | WPA2-AES and TKIP |
| Management Interface | Web-based configuration, SNMP, SSH, Telnet |
| Quality of Service (QoS) | IEEE 802.11e WMM support |
| Advanced Features | Rogue AP detection, wireless bridging, repeater mode |
| Antenna | Internal 3 x 3 MIMO antenna arrays |
| Mounting Options | Wall or ceiling mountable with included bracket |
| Dimensions | 240 x 165 x 42 mm (9.4 x 6.5 x 1.7 in) |
| Weight | 780 g (1.7 lb) |
| Cleaning Instructions | Disconnect power, wipe casing with dry soft cloth, avoid liquids |
| Spare Parts and Repairability | No user-serviceable internal parts; adapter and bracket available from NETGEAR support |
| Warranty | NETGEAR limited warranty, check support.netgear.com for details |
Frequently Asked Questions - WNDAP380R NETGEAR
How do I install the WNDAP380R?
Connect the access point to a PoE switch or the included 12V power adapter. Plug an Ethernet cable from your network to the Gigabit port. Wait for the power LED to turn green, then open a browser and go to the default IP address (usually 192.168.0.100) to complete the setup wizard.
How can I reset the access point to factory settings?
Locate the reset button on the back panel. Press and hold it for about 5 seconds until the power LED blinks. The device will restore default settings and reboot automatically.
Does the WNDAP380R support Power over Ethernet?
Yes, it supports IEEE 802.3af PoE. You can power the access point through a single Ethernet cable using a PoE switch or PoE injector, which simplifies installation in ceilings or walls.
What is the maximum wireless speed?
With 802.11n technology and 3x3 MIMO, the WNDAP380R can reach up to 300 Mbps on each of the 2.4 GHz and 5 GHz bands, for a combined throughput of up to 600 Mbps under optimal conditions.
Can I use it as a wireless repeater?
Yes. The WNDAP380R offers wireless bridge and repeater modes in its configuration software. You can extend an existing wireless network or connect two wired LANs wirelessly.
Which security settings should I choose?
For maximum protection, select WPA2-AES in the wireless security menu and use a long, random passphrase. You can also enable 802.1X with RADIUS for enterprise environments.
How do I update the firmware?
Download the correct firmware for the WNDAP380R from NETGEAR support. In the web interface, go to the Administration/File Update page, browse to the downloaded file, and upload it. Do not turn off the device during the update.
What mounting options are available?
The package includes a wall/ceiling mounting bracket. The case has keyhole slots that align with the bracket, allowing a secure flush mount. Make sure the antenna area is not blocked by metal surfaces.
How many SSIDs can I broadcast?
The WNDAP380R supports up to 16 SSIDs per radio, allowing separate networks for staff, guests, IoT devices, and more. Each SSID can have its own security settings and VLAN assignment.
What should I do if the device does not get an IP address?
Check that the Ethernet cable is connected to the Gigabit port and that the upstream router or switch has DHCP enabled. If the LED stays off, try another cable or connect the 12V power adapter instead of relying on PoE.
User questions about WNDAP380R NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WNDAP380R - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WNDAP380R by NETGEAR.
USER MANUAL WNDAP380R NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WNDAP380R
Category : Access Point