WAX630EP - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WAX630EP NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WAX630EP |
| Brand | Netgear |
| Wireless Standard | WiFi 6 (802.11ax) |
| Frequency Bands | Dual-band (2.4 GHz & 5 GHz) |
| Maximum Data Rate | Up to 4.8 Gbps (5 GHz) + 1.2 Gbps (2.4 GHz) |
| Ethernet Port | 1x 2.5 Gigabit Ethernet (PoE+ in) |
| Power Supply | PoE+ (802.3at) or 12V DC adapter (included) |
| Dimensions (W x D x H) | 235 x 235 x 40 mm |
| Weight | 1.2 kg (2.65 lbs) |
| Mounting | Ceiling or wall mount (bracket included) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| LED Indicators | Power, LAN, WLAN, Cloud status |
| Management | NETGEAR Insight cloud management; local web UI |
| Security | WPA3, WPA2, 802.1X, ACL, VLAN, Guest network |
| Number of SSIDs | Up to 16 per band (32 total) |
| MIMO | 4x4 (2.4 GHz) + 4x4 (5 GHz) |
| Simultaneous Clients | Up to 250+ |
| Warranty | Limited lifetime hardware warranty |
| Compliance | FCC, CE, IC |
Frequently Asked Questions - WAX630EP NETGEAR
How do I set up the NETGEAR WAX630EP access point?
Set up using the NETGEAR Insight app or web interface. Connect via PoE+ or included power adapter, then follow the quick start guide. Use the DHCP client IP or default IP 192.168.1.100 to access the web UI.
Does the WAX630EP support PoE?
Yes, it supports PoE+ (802.3at). You can power it via a PoE+ switch or injector. It also includes a 12V DC adapter if PoE is not available.
Can I use the WAX630EP as a standalone router?
No, it is an access point, not a router. It must be connected to a router or network switch to function.
What is the maximum number of clients supported?
The WAX630EP can handle up to 250+ concurrent clients under optimal conditions, thanks to its 4x4 MU-MIMO and OFDMA technology.
How do I reset the WAX630EP to factory defaults?
Press and hold the reset button on the device for about 10 seconds using a paperclip. The LED will blink, then reset to factory settings.
Does the WAX630EP support mesh networking?
It can be used in a mesh configuration with other NETGEAR Insight-managed access points, allowing seamless roaming and centralized management.
What security protocols are supported?
It supports WPA3, WPA2, 802.1X, MAC address filtering, VLAN tagging, and guest network isolation.
Can I mount the WAX630EP on a wall?
Yes, the package includes a mounting bracket for ceiling or wall installation. The device can be secured with screws (not included).
What is the warranty period for the WAX630EP?
NETGEAR offers a limited lifetime hardware warranty for this product, covering defects in materials and workmanship.
How do I update the firmware?
Firmware updates can be done via the web interface (Administration > Firmware Upgrade) or automatically through the NETGEAR Insight cloud service.
User questions about WAX630EP NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAX630EP - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAX630EP by NETGEAR.
USER MANUAL WAX630EP NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WAX630EP
Category : Access Point