GO 500 STUDIO - Video camera DataVideo - Free user manual and instructions
Find the device manual for free GO 500 STUDIO DataVideo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional video camera |
| Brand | DataVideo |
| Model | GO 500 STUDIO |
| Image Sensor | 1/2.8-inch CMOS sensor |
| Maximum Resolution | Full HD 1080p (1920x1080) |
| Pan Range | 360 degrees |
| Tilt Range | -30 to +90 degrees |
| Power Supply | DC 12V |
| Power Consumption | 12W |
| Dimensions | 168 x 140 x 176 mm |
| Weight | 1.4 kg |
| Video Output | HDMI and 3G-SDI |
| Control Interface | RS-232, RS-422, IR remote |
| Preset Positions | 255 programmable presets |
| Mounting | Tabletop or ceiling mount |
| Operating Temperature | 0 to 40 degrees Celsius |
| Storage Temperature | -20 to 60 degrees Celsius |
| Maintenance | Clean lens with soft dry cloth |
| Safety Certifications | CE, FCC |
| Spare Parts | Available from DataVideo service centers |
| Warranty | 1-year standard warranty |
Frequently Asked Questions - GO 500 STUDIO DataVideo
How do I connect the GO 500 STUDIO to a monitor?
Use the HDMI or 3G-SDI output to connect directly to a monitor or switcher. Select the correct input source on the display to see the camera feed.
Can I control the GO 500 STUDIO with a PTZ controller?
Yes, the camera supports RS-232 and RS-422 protocols. Connect a compatible PTZ controller to the control input and set the same baud rate and camera address.
How do I reset the camera to factory settings?
Use the on-screen menu or the physical reset button on the camera. Navigation is available through the menu using the IR remote or the buttons on the camera base.
What is the maximum resolution supported?
The camera outputs Full HD 1080p at 60 frames per second. It also supports 720p and lower resolutions for flexibility with different systems.
How do I clean the lens?
Use a soft, dry microfibre cloth to gently wipe the lens. Avoid liquids and compressed air. Always turn off the camera before cleaning.
Does the camera support Power over Ethernet (PoE)?
No, the GO 500 STUDIO is powered by a DC 12V power adapter. PoE is not supported, so you must plug in the included power supply.
Can I mount the camera upside down?
Yes, enable flip mode from the on-screen menu. This reverses the image and ensures correct orientation when mounted inverted.
How many preset positions can I store?
The camera can store up to 255 preset positions. Use the PTZ controller or IR remote to save and recall presets instantly.
What is the recommended operating temperature?
For optimal performance, keep the camera between 0°C and 40°C. Avoid placing it near heat sources or in direct sunlight.
Where can I find spare parts for the GO 500 STUDIO?
Spare parts such as mounting brackets, IR remote, and power adapters are available through DataVideo service centers. Contact your local dealer for official parts.
User questions about GO 500 STUDIO DataVideo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video camera in PDF format for free! Find your manual GO 500 STUDIO - DataVideo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GO 500 STUDIO by DataVideo.
USER MANUAL GO 500 STUDIO DataVideo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DataVideo
Model : GO 500 STUDIO
Category : Video camera