Xcellis QXS-312 - Disk array QUANTUM - Free user manual and instructions
Find the device manual for free Xcellis QXS-312 QUANTUM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Disk Array |
| Brand | Quantum |
| Model | Xcellis QXS-312 |
| Form Factor | 2U rackmount |
| Drive Bays | 12 x 3.5" hot-swap bays |
| Supported Drives | SAS and SATA |
| Max Capacity | Up to 240 TB (with 20 TB drives) |
| Controllers | Dual active-active storage controllers |
| Connectivity | 1/10 GbE Ethernet ports |
| Management | Web-based GUI and CLI |
| Power Supply | Redundant (2 x 800 W) hot-swappable |
| Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| Dimensions (H x W x D) | 8.7 x 44.7 x 52.1 cm |
| Weight | 15.5 kg (without drives) |
| Operating Temperature | 10°C to 35°C |
| Humidity | 8% to 90% non-condensing |
| Cooling | 3 hot-swap fan modules |
| LEDs | Status LEDs for power, network, disk activity |
| Security | Locking front bezel and optional Kensington slot |
| Maintenance | Clean with dry cloth; do not use liquids |
| Repairability | Hot-swappable drives, fans, power supplies, and controllers |
| Warranty | 3-year limited hardware warranty |
Frequently Asked Questions - Xcellis QXS-312 QUANTUM
What is the Quantum Xcellis QXS-312?
The Quantum Xcellis QXS-312 is a disk array storage system designed for media and entertainment workflows. It provides high-density, scalable storage with active-active controllers and supports SAS/SATA drives.
How do I install the Xcellis QXS-312 in a rack?
To install the Xcellis QXS-312, mount the 2U slide rails onto the rack posts, slide the unit into place, and secure it with screws. Connect power and network cables, then power on the system and configure it via the management interface.
How do I replace a faulty hard drive?
The drive bays are hot-swappable. Identify the failed drive from the amber LED, unlock the drive carrier, pull the lever to remove the drive, and insert a replacement drive with the same capacity and type. The system will automatically rebuild the volume.
How do I configure the storage system for the first time?
After powering on, connect to the web-based management UI using the default IP address. Use the setup wizard to create storage pools, volumes, and assign shares. For advanced configurations, refer to the administrator guide.
What should I do if the system does not power on?
Check the power cables and ensure power supplies are seated correctly. Verify the front power LED. If the LED is off, replace the power supply module. If the issue persists, contact Quantum support.
How do I monitor the health of the disk array?
The management interface provides real-time status for every component, including drives, fans, temperature, and power supplies. You can set up email alerts for critical events and generate logs for troubleshooting.
What are the supported drive interfaces and capacities?
The QXS-312 supports SAS and SATA drives of 3.5-inch form factor. It accepts drives with capacities up to 20 TB, giving a maximum raw capacity of 240 TB in the 12-bay chassis.
Can I expand the storage capacity by adding external shelves?
Yes, the Xcellis QXS-312 supports expansion shelves connected via SAS cabling. You can add additional disk shelves to scale capacity up to petabyte levels, depending on the controller configuration.
What maintenance does the disk array require?
Regularly clean the front filter (if present) and ensure airflow is not blocked. Check the event logs for warnings. Keep the firmware up to date. Replace any failed components immediately to maintain redundancy.
What safety precautions should I follow when handling the device?
Always ensure the system is grounded before touching internal components. Use an anti-static wrist strap to prevent electrostatic discharge. Do not block ventilation slots. If removing a power supply, use the handle and do not remove more than one at a time.
User questions about Xcellis QXS-312 QUANTUM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Disk array in PDF format for free! Find your manual Xcellis QXS-312 - QUANTUM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xcellis QXS-312 by QUANTUM.
USER MANUAL Xcellis QXS-312 QUANTUM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : QUANTUM
Model : Xcellis QXS-312
Category : Disk array