QUANTUM

Qflash TRIO Basic - Flash Drive QUANTUM - Free user manual and instructions

Find the device manual for free Qflash TRIO Basic QUANTUM in PDF.

📄 40 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice QUANTUM Qflash TRIO Basic - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Type Flash Unit (Speedlight)
Brand Quantum
Model Qflash TRIO Basic
Dimensions (approx.) 190 x 75 x 50 mm
Weight (approx.) 400 g (without batteries)
Power Source 4 x AA batteries (NiMH recommended)
Guide Number (ISO 100, approx.) 36 m
Flash Modes TTL, Manual, Stroboscopic
Recycle Time (approx.) 0.5 - 4 seconds depending on power level and battery condition
Number of Flashes (approx.) 200 - 400 per set of fresh batteries
Sync Methods Hot shoe, PC sync cord, optical slave
Swivel/Tilt Head Yes, 180° swivel, 90° tilt
Zoom Range (approx.) 24 - 85 mm (auto or manual)
Modeling Light Yes, LED
Display LCD panel
Construction Impact-resistant plastic
Maintenance Clean with a soft, dry cloth
Safety Precautions Do not expose to moisture, heat, or drop
Spare Parts AA batteries, sync cord, shoe mount
Repairability User-replaceable batteries; flash tube service by qualified technician
General Information Compatible with most DSLR and mirrorless cameras via hot shoe adapter

Frequently Asked Questions - Qflash TRIO Basic QUANTUM

How do I connect the Qflash TRIO Basic to my camera?
Mount the flash directly onto the camera's hot shoe. If your camera has a non-standard hot shoe, use an appropriate adapter. Alternatively, connect via a PC sync cord.
What batteries does the Qflash TRIO Basic use?
It uses 4 AA batteries. NiMH rechargeables are recommended for best performance and recycle times.
What is the guide number of this flash?
The guide number is approximately 36 meters at ISO 100. This determines the flash's power output.
How long does it take to recycle?
Recycle time varies from 0.5 seconds at full power to about 4 seconds at full power depending on battery condition and age.
Can I use this flash off-camera?
Yes, you can use it off-camera with a PC sync cord, wireless trigger, or by using the optical slave mode.
How do I clean the flash?
Wipe the exterior with a soft, dry cloth. Avoid using any liquids or abrasive cleaners. Keep the flash contacts clean.
Is the Qflash TRIO Basic compatible with mirrorless cameras?
Yes, it works with mirrorless cameras via the hot shoe. Some older mirrorless cameras may require a compact adapter.
What does the M modeling light do?
The modeling light emits a low-power continuous light to help you preview shadows and lighting before taking the shot.
My flash doesn't fire. What can I do?
Check that batteries are installed correctly and charged. Ensure the flash is fully seated on the camera. Try cleaning the hot shoe contacts. If using sync cord, check the connection.
Can I purchase spare parts for the Qflash TRIO Basic?
Yes, spare batteries and sync cords are available. For other parts like the flash tube, contact Quantum service.

User questions about Qflash TRIO Basic QUANTUM

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Flash Drive in PDF format for free! Find your manual Qflash TRIO Basic - QUANTUM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Qflash TRIO Basic by QUANTUM.

USER MANUAL Qflash TRIO Basic QUANTUM

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : QUANTUM

Model : Qflash TRIO Basic

Category : Flash Drive