FF-SULH - Ignition Raya - Free user manual and instructions
Find the device manual for free FF-SULH Raya in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Ignition Device |
| Brand | Raya |
| Model | FF-SULH |
| Compatibility | Gas boilers, furnaces, and water heaters |
| Supply Voltage | 12V DC (nominal) |
| Current Draw | 1.2 A max |
| Ignition Output | High voltage spark, 15 kV |
| Spark Energy | 1.5 J |
| Ignition Mode | Automatic on demand |
| Flame Detection | Ionization sensor |
| Operating Temperature | -20°C to +85°C |
| Dimensions (W x H x D) | 110 x 70 x 45 mm |
| Cable Length | 300 mm |
| Housing Material | Flame-retardant plastic |
| Mounting | Bracket included |
| Protection Rating | IP20 |
| Safety | CE, RoHS compliant |
| Maintenance | Wipe with dry cloth, inspect connections |
| Spare Parts | Electrode, cable set, sensor |
| Repair | Serviceable by qualified technician |
| Manual Access | Free PDF, 4 pages |
| Support | AI-powered FAQs and user forum |
Frequently Asked Questions - FF-SULH Raya
How do I install the Raya FF-SULH ignition device?
Turn off the gas supply and disconnect power. Mount the device using the included bracket, connect the high voltage cable to the spark electrode, and wire the supply to 12V DC. Ensure the flame sensor is properly positioned.
What power supply is required?
The FF-SULH operates on 12V DC. Use a regulated power supply with a maximum current draw of 1.2 A to avoid damage.
Why is there no spark after installation?
Check that the supply voltage is present and the ground connection is secure. Inspect the electrode gap and clean any carbon deposits. If the problem persists, test the sensor wiring.
How do I clean the ignition module?
Disconnect power and use a dry cloth to wipe the housing. For electrodes, use a fine emery cloth to remove carbon. Never use water or solvents.
Can I repair the FF-SULH myself?
Basic checks like wiring and cleaning are safe. For internal component replacement, contact a qualified technician to maintain safety and warranty.
Is the device compatible with all gas boilers?
It is designed for most standard gas heating systems. Always verify the electrical requirements and physical dimensions against your appliance's specifications.
What does the red LED indicator mean?
A steady red LED indicates power is on. Flashing red may signal a fault. Consult the manual for specific error codes.
How often should I replace the ignition device?
In normal residential use, the FF-SULH can last several years. Replace it if you notice frequent spark failures or physical damage.
Is it safe to use near flammable gases?
The unit is rated IP20 and designed for gas appliances, but always install it outside the gas flow path and keep it away from explosive atmospheres.
Where can I find the user manual?
The free manual is available for download at notice-facile.com in several languages. If your language is missing, request a translation via the website.
User questions about FF-SULH Raya
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual FF-SULH - Raya and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FF-SULH by Raya.
USER MANUAL FF-SULH Raya
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Raya
Model : FF-SULH
Category : Ignition