OCSB-70 - Ignition Raya - Free user manual and instructions
Find the device manual for free OCSB-70 Raya in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic ignition module for gas appliances |
| Brand | Raya |
| Model | OCSB-70 |
| Compatibility | Gas stoves, ovens, grills, and similar appliances |
| Input Voltage | 3V DC (two AA batteries, not included) |
| Ignition Output | High voltage spark (up to 20 kV) |
| Ignition Points | Single outlet |
| Activation Method | Push-button switch |
| Dimensions | 120 mm × 60 mm × 25 mm |
| Weight | 150 g |
| Cable Length | 400 mm |
| Housing Material | Heat-resistant ABS plastic |
| Operating Temperature | -10°C to 80°C |
| Maintenance | Wipe with a dry cloth, keep contacts clean |
| Safety Features | Built-in anti-misoperation switch, flame failure shutdown (on compatible appliances) |
| Usage | Indoor and outdoor gas appliances |
| Installation | DIY-friendly, direct replacement for most standard igniters |
| Certifications | CE, RoHS |
| Warranty | 12 months |
Frequently Asked Questions - OCSB-70 Raya
How do I install the Raya OCSB-70 ignition module?
Ensure the appliance is disconnected from power. Remove the old igniter, connect the high-voltage wire to the spark electrode, and mount the module with screws or adhesive. Insert two AA batteries (3V DC) and test the push-button.
Why is there no spark when pressing the button?
Check if the batteries are correctly installed and not depleted. Make sure the high-voltage wire is securely connected to the electrode and the electrode tip is clean. Also verify the push-button switch is functioning.
Can I use this module with any gas stove?
The OCSB-70 is designed for standard gas stoves, ovens, and grills with a single ignition outlet. For dual-burner sparking, you may need a different model or a splitter.
What batteries does the OCSB-70 require?
It requires two AA-type batteries (1.5V each) in series, giving a total of 3V DC. Alkaline batteries are recommended for reliable performance.
How often should I replace the batteries?
Depending on usage, batteries typically last 12–18 months. When the spark becomes weak or intermittent, replace both batteries at the same time.
Can the ignition module be repaired if it fails?
Yes, the module is separable. You can replace the internal high-voltage generator or the switch assembly. However, warranty service is recommended for defects.
Is the Raya OCSB-70 safe to use outdoors?
Yes, the module is rated for outdoor use as long as it is installed in a dry location and not exposed to direct water spray. The ABS housing is weather-resistant.
Why does the sparking stop after a few seconds?
This is normal: safety circuitry cuts off ignition after 10 seconds to prevent overheating. Release the button and press again after a few seconds.
Does the module work with natural gas and propane?
Yes, the ignition spark is suitable for both natural gas (methane) and liquefied petroleum gas (propane/butane), as long as the electrode gap is set correctly.
Is a ground wire required for installation?
For proper operation and safety, connect the ground terminal to the appliance chassis or metal frame using the provided cable. This ensures reliable spark generation.
User questions about OCSB-70 Raya
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ignition in PDF format for free! Find your manual OCSB-70 - Raya and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OCSB-70 by Raya.
USER MANUAL OCSB-70 Raya
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Raya
Model : OCSB-70
Category : Ignition