D3 - Receiver Audac - Free user manual and instructions
Find the device manual for free D3 Audac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Audio receiver |
| Marque | Audac |
| Modèle | D3 |
| Puissance de sortie | 100 W per channel into 4 ohms |
| Nombre de canaux | 2 |
| Réponse en fréquence | 20 Hz - 20 kHz |
| Entrées audio | RCA, XLR |
| Sorties audio | Speaker terminals, line out |
| Impédance de charge | 4 - 8 ohms |
| Rapport signal/bruit | >90 dB |
| Dimensions (L x H x P) | 430 x 88 x 300 mm |
| Poids | 8 kg |
| Alimentation | 220-240 V AC, 50/60 Hz |
| Consommation en veille | <1 W |
| Cooling | Convection |
| Mounting | 19" rack-mountable |
| Matériau du boîtier | Steel chassis |
| Entretien et nettoyage | Use a dry, soft cloth; avoid liquids |
| Sécurité | Overload and short-circuit protection |
| Pièces détachées et réparabilité | Spare parts available via Audac service; repair by qualified personnel |
| Informations générales | Designed for professional installation |
Frequently Asked Questions - D3 Audac
How do I connect speakers to the Audac D3 receiver?
Connect your speakers to the speaker terminals on the rear panel, ensuring the impedance is between 4-8 ohms. Use quality speaker wire and tighten the terminals securely.
Can the D3 be used in a 100V line speaker system?
No, the D3 is a standard low-impedance receiver. For 100V line systems, you would need a 100V line transformer or a dedicated 100V amplifier from the Audac range.
What is the power output of the D3?
The D3 delivers 100 watts per channel into 4 ohms, making it suitable for small to medium-sized rooms.
Does the D3 have a standby mode?
Yes, the D3 has a standby mode with power consumption below 1 watt. Use the front panel power button to switch between on and standby.
How do I reset the D3 receiver?
To reset the D3, turn it off, wait 30 seconds, and turn it back on. If issues persist, disconnect the power for one minute and reconnect.
What inputs are available on the D3?
The D3 offers both RCA and XLR inputs, allowing connection to a variety of audio sources such as mixers, CD players, or audio interfaces.
Can the D3 be rack-mounted?
Yes, the D3 has a 19-inch rack-mountable design. Use the included rack ears and screws to mount it in a standard equipment rack.
How should I clean the D3?
Use a dry, soft cloth to wipe the chassis and front panel. Never use liquids or sprays, as they may damage the electronics.
What safety features does the D3 have?
The D3 is equipped with overload and short-circuit protection on the speaker outputs, ensuring safe operation in professional installations.
Where can I find spare parts or repair service for the D3?
Spare parts and repair services are available through Audac's official service network. Contact your local distributor or Audac customer support for assistance.
User questions about D3 Audac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual D3 - Audac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D3 by Audac.
USER MANUAL D3 Audac
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audac
Model : D3
Category : Receiver