AX-DSPX-FD2 - Audio/video converter Metra - Free user manual and instructions
Find the device manual for free AX-DSPX-FD2 Metra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Audio/Video Converter |
| Brand | Metra |
| Model Number | AX-DSPX-FD2 |
| Product Category | Car Audio/Video Interface |
| Compatible Vehicles | Select Ford models (see fit guide) |
| Power Supply | 12V DC (negative ground) |
| Input Type | Speaker-level and line-level, composite video |
| Output Type | Low-level RCA preamp outputs, video output |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.05% |
| Output Voltage | 2V RMS |
| Dimensions | 3.5 x 2.5 x 1.0 inches |
| Weight | 0.4 lbs |
| Mounting | In-vehicle, using included hardware |
| Key Functions | Digital signal processing, audio/video signal conversion, adjustable crossover and equalizer |
| Maintenance | Wipe with dry cloth; do not use solvents |
| Safety | Disconnect battery before installation; professional installation recommended |
| Spare Parts | Replacement fuses and wiring harness are available |
| Repairability | Designed for professional servicing only |
| General Information | Compatible with OEM head units and aftermarket amplifiers |
Frequently Asked Questions - AX-DSPX-FD2 Metra
What is the Metra AX-DSPX-FD2?
The Metra AX-DSPX-FD2 is an audio/video converter designed for select Ford vehicles. It converts factory speaker-level signals to low-level RCA outputs while adding digital signal processing.
Which Ford vehicles are compatible?
The AX-DSPX-FD2 is specifically engineered for a range of Ford models with factory data bus systems. Check the fit guide on the Metra website for your exact year and model.
Does it support video conversion?
Yes, it includes a composite video input and output for converting video signals from an OEM source to RCA for aftermarket displays or cameras.
How do I connect it to my factory radio?
Connect the factory speaker wire harness to the vehicle-specific plug, then attach the RCA outputs to your aftermarket amplifier or monitor. The unit is plug-and-play with no cutting required.
Can I use it with an aftermarket amplifier?
Absolutely. The low-level RCA outputs are compatible with most aftermarket amplifiers, providing a clean 2V preamp signal.
What is the power requirement?
The unit operates on 12V DC with a negative ground, typical of all vehicles. It draws low current and can be connected to the factory wiring via the included harness.
How do I adjust the DSP settings?
The AX-DSPX-FD2 has adjustable crossovers and equalizers via small switches or pots on the device. Refer to the manual for specific tuning guidelines.
Is installation difficult?
Installation is straightforward for someone with basic car audio experience. You simply plug in the harness, connect RCA cables, and mount the unit. Professional installation is recommended for the best results.
Does it come with a warranty?
Metra offers a 1-year limited warranty against defects in materials and workmanship. Register your product on their website for warranty support.
What are the safety precautions?
Always disconnect the vehicle battery before installation to avoid short circuits. Do not operate the device outside its voltage range, and ensure the unit is mounted securely away from moving parts.
User questions about AX-DSPX-FD2 Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/video converter in PDF format for free! Find your manual AX-DSPX-FD2 - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX-DSPX-FD2 by Metra.
USER MANUAL AX-DSPX-FD2 Metra
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Metra
Model : AX-DSPX-FD2
Category : Audio/video converter