VIP-148L - Loudspeaker Valcom - Free user manual and instructions
Find the device manual for free VIP-148L Valcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker for indoor paging and music |
| Brand | Valcom |
| Model | VIP-148L |
| Speaker Type | Full-range, single cone |
| Impedance | 8 ohms (direct) / 25V or 70.7V line operation |
| Power Rating | 15W RMS continuous |
| Power Taps | 1.25W, 2.5W, 5W, 10W, 15W (selectable) |
| Frequency Response | 80 Hz - 15 kHz |
| Sensitivity | 90 dB SPL / 1W / 1m |
| Mounting Type | Recessed ceiling mount (open back) |
| Housing Material | Steel backcan |
| Grille Material | Powder-coated steel, paintable |
| Color | White |
| Dimensions (W x H x D) | 9.5 x 9.5 x 4.5 inches (241 x 241 x 114 mm) |
| Weight | 3.5 lbs (1.6 kg) |
| Compliance | UL 1480, UL 2043 (plenum rated) |
| Safety | For indoor use; low voltage connections; install per local codes |
| Maintenance | Wipe with dry cloth; do not use aggressive solvents |
| Repairability | Replaceable speaker driver and transformer; grille removable |
| Included Accessories | Raceman kit, magnetic driver bits, grille |
Frequently Asked Questions - VIP-148L Valcom
How do I connect the VIP-148L to a 70V audio system?
Use the transformer taps located on the speaker backcan. Select the desired power tap (1.25W, 2.5W, 5W, 10W, 15W) by rotating the switch. The speaker can also be used with 25V systems or in direct 8 ohms mode by bypassing the transformer.
What is the maximum wattage I can feed to this speaker?
The continuous power rating is 15W RMS. For short peaks, the speaker can handle up to 20W, but we recommend staying at or below 15W to avoid distortion or damage.
Can I install the VIP-148L in a suspended ceiling?
Yes, the recessed design fits standard 2x2 or 2x4 ceiling tiles with an appropriate raceway or plaster frame (not included). Use the enclosed mounting clamps for a secure fit.
Is the speaker suitable for outdoor use?
No, the VIP-148L is designed for indoor applications only. Exposure to moisture or extreme temperatures will damage the driver and transformer.
How do I set the power tap switch on the speaker?
Locate the rotary switch on the back of the speaker. Rotate it to match the desired wattage tap (1.25W, 2.5W, 5W, 10W, or 15W). Higher settings produce louder sound but require more amplifier power.
What amplifier should I pair with the VIP-148L?
Use a compatible paging amplifier that supports 70.7V or 25V lines. For direct 8-ohm connection, any stable amplifier rated at 15W RMS per channel works.
Can I paint the speaker grille?
Yes, the grille is paintable to match your decor. Use a thin, even coat of spray paint. Be sure to cover the speaker driver beneath to prevent overspray.
How should I clean the VIP-148L?
Wipe the grille and housing with a dry, soft cloth. For stubborn dirt, use a slightly damp cloth with mild soap. Do not use solvents or abrasive cleaners, and never immerse the speaker.
What is the impedance of the speaker?
The VIP-148L has a nominal impedance of 8 ohms when used in direct mode. When used with the transformer, the impedance is reflected through the line voltage, and the tap setting determines the load on the amplifier.
Are the driver and transformer replaceable?
Yes, the speaker is designed for serviceability. The driver and transformer can be accessed by removing the front grille. Replacement parts are available through Valcom; consult the manual for part numbers.
User questions about VIP-148L Valcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual VIP-148L - Valcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VIP-148L by Valcom.
USER MANUAL VIP-148L Valcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Valcom
Model : VIP-148L
Category : Loudspeaker