L3-XGS4804 - Switch AIRLIVE - Free user manual and instructions
Find the device manual for free L3-XGS4804 AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Managed Layer 3 Ethernet Switch |
| Number of ports | 48 x 10/100/1000 Mbps Gigabit Ethernet ports + 4 x SFP+ uplink ports |
| Switching capacity | 176 Gbps |
| Forwarding rate | 130.9 Mpps |
| MAC address table | 16K entries |
| VLAN support | Up to 4094 VLANs |
| Routing | Static routing, RIP, OSPF, BGP |
| QoS | 8 priority queues per port |
| Security features | ACL, port security, SSH, SNMPv3 |
| Management | Web GUI, CLI, SNMP, RMON |
| Dimensions (W x D x H) | 440 x 360 x 43 mm |
| Weight | 5.2 kg |
| Power input | 100-240V AC, 50-60Hz |
| Power consumption | Max 90 W |
| Cooling | Dual fans with smart speed control |
| Mounting | 19-inch rack mountable |
| Operating temperature | 0°C to 50°C |
| Storage humidity | 5% to 95% non-condensing |
| Maintenance | Regularly check system logs and monitor port status via management interface |
| Cleaning | Disconnect power before cleaning; use a dry cloth |
| Spare parts and repairability | Professional service required, no user-serviceable parts |
Frequently Asked Questions - L3-XGS4804 AIRLIVE
How to access the web interface of the L3-XGS4804?
Connect your computer to a Gigabit Ethernet port, set a static IP in the same subnet as the default switch IP (192.168.1.1), open a web browser, and enter the IP address. Use the default credentials (admin/admin) if not changed.
What are the default login credentials?
The default username is admin and the default password is admin. You should change them after initial login for security.
How to reset the switch to factory settings?
Use a pointed object to press and hold the reset button on the front panel for 5 seconds. The switch will reboot with factory default settings.
How to update firmware?
Download the firmware from the official AirLive website, access the maintenance menu in the web interface, select Firmware Upgrade, upload the file, and reboot. Ensure the power stays stable.
How to configure VLANs?
Go to VLAN settings in the web GUI, create new VLANs, assign ports to each VLAN, and set tagged/untagged membership. Use the CLI for advanced configuration.
Can I use link aggregation?
Yes, the switch supports IEEE 802.3ad for static link aggregation. Configure LAG groups in the web interface or CLI to bundle multiple ports.
Does it support PoE?
No, the L3-XGS4804 is a non-PoE switch. You must use PoE injectors or a separate PoE switch for powered devices.
Is it rack mountable?
Yes, the switch comes with rack-mount brackets and is designed for standard 19-inch racks. Mounting screws are included.
What SFP modules are compatible?
It accepts Gigabit SFP and 10G SFP+ modules. Use compatible modules from AirLive or certified vendors to ensure proper operation.
How to monitor network traffic?
You can use SNMP with third-party tools, or the built-in port mirroring feature to analyze traffic. Access RMON statistics in the web interface.
User questions about L3-XGS4804 AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual L3-XGS4804 - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. L3-XGS4804 by AIRLIVE.
USER MANUAL L3-XGS4804 AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : L3-XGS4804
Category : Switch