H-12SDI-ATSC-IPLL - Television Thor - Free user manual and instructions
Find the device manual for free H-12SDI-ATSC-IPLL Thor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Broadcast Monitor / Television |
| Brand | Thor |
| Model | H-12SDI-ATSC-IPLL |
| Display Diagonal | 12 inches |
| Panel Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Brightness (typical) | 300 cd/m² |
| Input Video Interfaces | 12G-SDI, HDMI, ATSC (RF input), IP (Ethernet) |
| Output Video Interfaces | 12G-SDI loop-through, 3.5mm headphone jack |
| Tuner | ATSC (digital terrestrial television) |
| Network Interface | 10/100/1000 Mbps Ethernet (IP streaming) |
| Low Latency Mode | Yes, dedicated low-latency processing for real-time monitoring |
| VESA Mounting | 100 x 100 mm |
| Power Supply Type | AC adapter (24V DC, 2.5A) |
| Power Consumption (typical) | 25 W |
| Dimensions (W x H x D) | 324 x 224 x 52 mm |
| Weight | 2.6 kg |
| Operating Temperature Range | 0°C to 40°C |
| Storage Temperature Range | -20°C to 50°C |
| Included in the Box | Monitor, power adapter, remote control, antenna cable, user manual |
| Recommended Cleaning Method | Dust with a soft dry cloth; use a slightly dampened microfiber cloth for stubborn smudges |
| Safety Compliance | FCC, CE, RoHS |
| Spare Parts | Available through Thor authorized service centers (power supply, main board, display panel) |
| Repairability | Moderate: modular internal components, service manual provided to certified technicians |
| Additional Features | Waveform monitor, vectorscope, focus assist, false color, and Tally indicator |
Frequently Asked Questions - H-12SDI-ATSC-IPLL Thor
How do I connect an antenna to the H-12SDI-ATSC-IPLL?
Connect your antenna to the ATSC RF input on the back panel. Then power on the TV, go to the input/source menu, and select ATSC or Antenna. Run the channel scan to find available digital channels.
Does this TV support IP streaming?
Yes, the H-12SDI-ATSC-IPLL has a Gigabit Ethernet port that enables IP-based video streaming. You can access streaming protocols such as NDI or RTSP depending on the firmware configuration.
What is the native resolution of the display?
The display has a native resolution of 1920 x 1080 pixels (Full HD), with support for standard video resolutions up to 1080p. For SDI inputs, it can handle up to 12G-SDI 4K signals, downscaling to 1080p for display.
How do I enable low latency mode?
Low latency mode is activated via the control menu on the monitor. Press the MENU button, navigate to System or Display settings, and toggle Low Latency to On. This mode reduces signal processing delay for real-time monitoring.
Can I use this monitor as a computer display?
Yes, you can connect a computer via HDMI or SDI (if your computer has SDI output). The monitor will automatically detect the input and display the computer signal. Make sure to select the correct input source via the INPUT button.
What is the proper way to clean the screen?
Turn off the monitor and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. For stubborn stains, slightly dampen the cloth with water or a specialized screen cleaner. Do not spray liquid directly on the display, and avoid abrasive materials.
What should I do if there is no sound?
First, check whether the volume is muted or set to zero. Press the VOL + button on the remote. Then verify the audio output settings: if you are using SDI or HDMI, ensure the source device is sending audio. If using headphones, make sure the jack is fully inserted and not defective. Finally, check the audio input settings in the menu.
How do I mount the monitor on a VESA arm?
The monitor has a 100 x 100 mm VESA mount pattern on the back. Use a compatible VESA plate and recommended screws (typically M4 x 10mm). Remove the rubber cover on the back, attach the bracket, and tighten securely. Always follow the instructions provided with the VESA arm.
Does the device support HDCP?
The HDMI input supports HDCP 1.4 and 2.2, allowing playback of protected content from devices like streaming sticks, Blu-ray players, or cable boxes. SDI inputs do not use HDCP. If you see a black screen on HDMI, try a different source or check the HDCP compatibility.
How do I update the firmware?
Firmware updates are distributed via the Ethernet port using a dedicated software tool from Thor. Visit the Thor official website (or contact support) to download the latest firmware and update instructions. You can also check for updates directly from the monitor's Network Settings menu if available.
User questions about H-12SDI-ATSC-IPLL Thor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual H-12SDI-ATSC-IPLL - Thor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H-12SDI-ATSC-IPLL by Thor.
USER MANUAL H-12SDI-ATSC-IPLL Thor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Thor
Model : H-12SDI-ATSC-IPLL
Category : Television