MX-CDP2688 - Range hood Mx Onda - Free user manual and instructions
Find the device manual for free MX-CDP2688 Mx Onda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Mx Onda |
| Model | MX-CDP2688 |
| Product Type | Range hood (wall-mounted) |
| Mounting Type | Wall-mounted |
| Width | 60 cm |
| Height | 17 cm |
| Depth | 40 cm |
| Weight | 9 kg |
| Air Extraction Capacity | 650 m³/h |
| Number of Speeds | 3 |
| Noise Level | 65 dB (max) |
| Lighting | 2 x LED lamps |
| Filter Type | Aluminium mesh grease filter (washable) |
| Duct Diameter | 150 mm |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 150 W |
| Control Type | Push-button control panel |
| Operation Modes | Extraction and recirculation |
| Cleaning & Maintenance | Wash filters regularly; clean surfaces with a soft damp cloth |
| Safety Features | Thermal cut-off protection, emergency stop |
| Spare Parts Availability | Replacement filters, lamps, and control boards available via service network |
| General Information | Energy efficiency class B (typical) |
Frequently Asked Questions - MX-CDP2688 Mx Onda
How do I install the range hood?
Make sure the wall is sturdy and the duct outlet is accessible. Use the provided mounting template to mark screw positions, then drill and fix the hanger bracket. Lift the hood onto the bracket, secure it, and connect the duct to the exhaust opening. Finally, connect the power supply and test the operation. For recirculation mode, install an activated carbon filter before operation.
Can the hood be used in recirculation mode without an outside duct?
Yes, the MX-CDP2688 supports recirculation mode. You need to install an activated carbon filter to absorb odours. The air is then filtered and returned to the kitchen. This is ideal for installations where ducting to the outside is not possible.
How often should the grease filter be cleaned?
Clean the aluminium grease filter every 2 to 3 months, or more often if you cook frequently. Wash it by hand with warm water and mild detergent, or place it in the dishwasher. Dry it completely before reinstalling. A clogged filter reduces suction and can create a fire hazard.
How do I replace the LED lamp?
First turn off the power. Remove the mesh filter to access the lamp housing. Gently twist and pull the LED lamp from its socket. Insert the new lamp by aligning the pins and twisting it clockwise until it locks. Reinstall the filter and restore power. Use only replacement lamps specified in the manual.
Why is the hood excessively noisy?
Check if the grease filter is dirty or if the air duct is blocked. A loose installation or a vibrating component can also cause noise. Ensure that all screws are tight and the hood is properly levelled. If the noise persists when operating at high speed, contact technical support. The maximum noise level is 65 dB.
What is the maximum duct length?
For optimal performance, the duct length should not exceed 5 metres. Longer ducts reduce airflow and increase noise. Use smooth, rigid ducts with a diameter of 150 mm. Minimise bends and use only gentle curves to maintain efficiency.
How do I operate the control panel?
The control panel features push buttons for each function. Press the power button to turn the hood on. Select the desired speed (low, medium, high) by pressing the corresponding button. The light button toggles the LED lamps independently. In recirculation mode, you may also have a timer function if equipped; refer to the manual for specific operations.
What maintenance is required for the motor?
The motor is sealed and requires no regular maintenance. However, ensure that the grease filters are clean to prevent grease build-up in the motor. Periodically check the fan blades for dust accumulation and clean them with a cloth. Do not spray water directly onto the motor.
Does the hood come with a remote control?
No, the MX-CDP2688 is controlled via the push-button panel on the front. Remote control is not included with this model. However, you can use the timer feature (if available) to automatically turn off the hood after a set time.
How do I set up the activated carbon filter for recirculation mode?
First, ensure the hood is unplugged. Remove the grease filter and insert the activated carbon filter over the motor grid, securing it with the provided clips. Replace the grease filter. Then switch the unit to recirculation mode, if adjustable. The carbon filter helps eliminate odours and should be replaced every 4-6 months.
User questions about MX-CDP2688 Mx Onda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual MX-CDP2688 - Mx Onda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX-CDP2688 by Mx Onda.
USER MANUAL MX-CDP2688 Mx Onda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mx Onda
Model : MX-CDP2688
Category : Range hood