MIX-2308DUSB - Subwoofer Kaiser - Free user manual and instructions
Find the device manual for free MIX-2308DUSB Kaiser in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Kaiser |
| Model | MIX-2308DUSB |
| Driver Size | 8 inches |
| Power Output (RMS) | 100 W |
| Frequency Response | 30 Hz - 200 Hz |
| Impedance | 8 Ohms |
| Signal-to-Noise Ratio | >85 dB |
| Connectivity | RCA line input L/R, speaker level input |
| Controls | Volume, phase switch, crossover frequency selector |
| Enclosure Type | Bass reflex |
| Power Supply | 100-240V AC, 50/60Hz |
| Standby Power Consumption | <0.5 W |
| Cabinet Material | MDF with vinyl finish |
| Dimensions (W x H x D) | 280 x 260 x 300 mm |
| Weight | 5.5 kg |
| Box Contents | Subwoofer, power cable, user manual |
| Maintenance | Clean with a soft, dry cloth |
| Safety | Place in a dry location; keep away from water and heat sources |
| Spare Parts / Repairability | No user-serviceable parts; consult authorized service center |
Frequently Asked Questions - MIX-2308DUSB Kaiser
How do I connect the MIX-2308DUSB subwoofer to my amplifier?
Connect the RCA outputs of your amplifier to the line inputs on the subwoofer. For systems without a dedicated subwoofer output, use the speaker level inputs and connect them in parallel with the main speaker terminals.
Where should I place the subwoofer for best sound?
Place the subwoofer on a solid, flat surface at least 10 cm away from walls to reduce unwanted reflections. The corner placement can increase output but may cause boomy bass; experimentation is recommended.
How do I set the crossover frequency?
Set the crossover frequency knob to match your main speakers' low-frequency limit. Typically, a setting between 80 Hz and 120 Hz works well for most systems.
What is the phase switch for?
The phase switch (0° or 180°) aligns the subwoofer's output with your main speakers. Listen while switching and choose the setting that produces the fullest, most integrated bass.
Why is there no sound from the subwoofer?
Check that the subwoofer is powered on and the volume is not set to minimum. Verify the cables are securely connected and the crossover setting is appropriate. Also ensure the source signal is present.
Can I use this subwoofer with my computer?
Yes. If your computer has a 3.5mm headphone jack, use a RCA to 3.5mm adapter cable to connect to the subwoofer's line inputs. Alternatively, connect to a soundbar or amplifier.
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the cabinet. Avoid using any chemical cleaners or water, as they may damage the finish.
Does the subwoofer have an auto standby mode?
Yes, the subwoofer automatically switches to standby mode when no audio signal is detected, reducing power consumption to less than 0.5 W.
What are the physical dimensions and weight?
The dimensions are 280 mm x 260 mm x 300 mm (W x H x D) and the unit weighs 5.5 kg.
Can I place the subwoofer on a shelf?
It is not recommended to place the subwoofer on a shelf because vibrations can affect the sound and cause resonance. Place it on the floor for optimal performance.
User questions about MIX-2308DUSB Kaiser
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual MIX-2308DUSB - Kaiser and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MIX-2308DUSB by Kaiser.
USER MANUAL MIX-2308DUSB Kaiser
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kaiser
Model : MIX-2308DUSB
Category : Subwoofer