KSW-1008 - Loudspeaker Kaiser - Free user manual and instructions
Find the device manual for free KSW-1008 Kaiser in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Kaiser |
| Model | KSW-1008 |
| Dimensions (H x W x D) | Approx. 250 x 180 x 150 mm |
| Weight | Approx. 2.5 kg per speaker |
| Power Handling | 10–30 W RMS |
| Frequency Response | 80 Hz – 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | Approx. 86 dB (1 W/1 m) |
| Drivers | 1 x 4 inch woofer, 1 x 0.75 inch tweeter |
| Enclosure Material | MDF (Medium-density fibreboard) |
| Connectivity | Wired via speaker terminals (banana plugs or bare wire) |
| Placement | Bookshelf, stand, or wall-mount (bracket not included) |
| Recommended Amplifier | 10–30 W per channel at 8 ohms |
| Magnetic Shielding | Yes, suitable for placement near TV screens |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents or water. |
| Safety Warnings | Keep away from moisture, heat sources, and direct sunlight |
| Spare Parts and Repair | No user-serviceable parts. Contact qualified service for any repair. |
| Included Accessories | None (speaker cable not included) |
Frequently Asked Questions - KSW-1008 Kaiser
How do I connect the Kaiser KSW-1008 speaker?
Use a quality speaker cable to connect the amplifier's positive and negative terminals to the corresponding terminals on the speaker. Ensure the polarity is correct (+ to +, – to –) for optimal sound.
What amplifier power is recommended for this speaker?
An amplifier delivering 10 to 30 Watts RMS per channel at 8 ohms is ideal. Exceeding the rated power can cause distortion and damage.
Can the KSW-1008 be used as a rear surround speaker?
Yes, its compact size and 8-ohm impedance make it suitable for surround sound applications when matched with appropriate speakers and amplifier.
How should I clean the speaker cabinet?
For the cabinet, use a soft, dry cloth to gently wipe away dust. Never use wet cloths, solvents, or abrasive cleaners as they may damage the finish.
What is the frequency response of the KSW-1008?
The KSW-1008 covers a frequency range of approximately 80 Hz to 20 kHz, suitable for music and home theater applications.
Is the speaker magnetically shielded?
Yes, the KSW-1008 is magnetically shielded, so it can be placed near a CRT TV or monitor without causing color distortion (applies to older displays).
Can I wall-mount this speaker?
Yes, the rear panel has a keyhole mount. Use appropriate screws and anchors for the wall. Ensure the wall can support the speaker's weight.
What if there is no sound coming from the speaker?
Check that the amplifier is on and not muted. Verify the speaker wire connections are secure and that the receiver is correctly set to the speaker zone. Also test with a different cable or source.
Is the speaker suitable for outdoor use?
No, the KSW-1008 is designed for indoor use only. Exposing it to humidity or rain could damage the drivers and crossover.
Can these speakers be used with a subwoofer?
Yes, you can pair them with a subwoofer to extend low-frequency response. Set the amplifier's crossover to route bass (<80 Hz) to the subwoofer for better performance.
User questions about KSW-1008 Kaiser
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual KSW-1008 - Kaiser and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSW-1008 by Kaiser.
USER MANUAL KSW-1008 Kaiser
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kaiser
Model : KSW-1008
Category : Loudspeaker