51562 - Water pump WilTec - Free user manual and instructions
Find the device manual for free 51562 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water pump |
| Brand | WilTec |
| Model | 51562 |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 800 W |
| Max. Flow Rate | 5000 L/h |
| Max. Delivery Head | 8 m |
| Inlet/Outlet Connection | 25 mm (1") |
| Material | Stainless steel and plastic |
| Protection Class | IPX8 (submersible) |
| Dimensions (L | W |
| ×H) | 20 × 15 × 25 cm |
| Weight | 3.5 kg |
| Function | Water transfer, drainage, garden watering |
| Operation | Connect to hose; fully submerge in water; plug in and start |
| Maintenance | Clean filter and impeller regularly; rinse with clean water after use |
| Safety | Do not run dry; use RCD; avoid contact with water when plugged in |
| Spare Parts | Impeller, seal, filter available |
| Repairability | User-replaceable parts; consult manual for instructions |
| Manual | Free PDF download from notice-facile.com |
| Warranty | 2-year warranty |
Frequently Asked Questions - 51562 WilTec
How do I start the WilTec 51562 water pump?
Ensure the pump is fully submerged and connected to a 230 V power source. Open the outlet valve, then plug in the pump. It will start automatically if equipped with a float switch, otherwise it runs continuously. Check the manual for specific start-up procedures.
Can the pump run dry?
No, it should never run dry. Running without water can damage the impeller and seal. To prevent this, use a float switch or monitor the water level.
How often should I clean the pump?
Clean the inlet filter and impeller after each use or when you notice a drop in performance. Regular cleaning prevents clogging and extends the pump's lifespan.
What type of liquids can this pump handle?
This pump is designed for clean water only. Do not use for flammable, corrosive, or abrasive liquids, as they can damage the internal components and void the warranty.
How do I maintain the pump for winter?
Before winter, drain all water and dry the pump thoroughly. Store it in a frost-free place. You can also rinse with clean water to remove any debris.
What is the maximum suction height?
For a submersible pump, suction is not applicable; it works by pushing water from a submerged position. The maximum delivery head is about 8 meters, as specified.
Why is the pump not delivering water?
Check if the pump is fully submerged, the filter is clogged, the outlet hose is kinked, or the power supply is connected. Also, ensure the pump is primed if needed. See the troubleshooting section of the manual.
Can I replace the impeller myself?
Yes, the impeller is a user-replaceable part. Follow the instructions in the manual, ensure the pump is unplugged, and use the correct tools. If you are unsure, contact a professional.
Does the pump have a thermal overload protection?
Yes, most WilTec pumps feature built-in thermal overload protection that stops the motor if it becomes too hot. After cooling down, it restarts automatically.
How do I connect the pump to a hose?
Attach a suitable hose to the outlet connection (25 mm) and secure it with a clamp. Make sure the connection is tight to prevent leaks. The inlet is filtered and must remain clear.
User questions about 51562 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 51562 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 51562 by WilTec.
USER MANUAL 51562 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 51562
Category : Water pump