52013 - Water pump WilTec - Free user manual and instructions
Find the device manual for free 52013 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Electric water pump |
| Brand | WilTec |
| Model | 52013 |
| Power supply | 230 V, 50 Hz |
| Motor power | 750 W |
| Max. flow rate | 5000 L/h |
| Max. delivery head | 35 m |
| Max. suction depth | 8 m |
| Connection | 1" BSP inlet and outlet |
| Pump body material | Cast iron |
| Impeller material | Stainless steel |
| Protection class | IPX4 |
| Thermal protection | Built-in overload switch |
| Self-priming | Yes |
| Dimensions (L x W x H) | 30 x 20 x 25 cm |
| Weight | 8.5 kg |
| Included accessories | User manual |
| Recommended use | Garden irrigation, water transfer |
| Maintenance | Clean inlet filter regularly |
| Spare parts availability | Available from manufacturer |
Frequently Asked Questions - 52013 WilTec
What is the maximum flow rate of the WilTec 52013?
The maximum flow rate is up to 5000 liters per hour, depending on the delivery head.
Can this pump run dry?
No, running the pump without water can damage the mechanical seal. Always ensure the pump is primed.
How do I prime the pump before first use?
Fill the suction hose and the pump casing with water using the filling plug before starting the motor.
What maintenance does the pump require?
Regularly clean the inlet filter and check that the impeller is not blocked. Drain the pump if not used for a long time.
Is the pump self-priming?
Yes, it is self-priming up to a suction depth of 8 meters, but it must initially be filled with water.
What is the maximum suction lift?
The maximum suction lift is 8 meters.
How should I store the pump in winter?
Drain all water and store the pump in a frost-free room. Protect the pump from freezing temperatures.
What safety features does the pump have?
The pump is equipped with a thermal overload protector that switches off the motor if it overheats.
Can I connect the pump to a pressure tank?
Yes, it can be connected to a pressure tank to maintain constant water pressure, provided a pressure switch is installed.
Where can I get spare parts for this pump?
Spare parts such as seals and impellers are available from WilTec customer service or authorized dealers.
User questions about 52013 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 52013 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 52013 by WilTec.
USER MANUAL 52013 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 52013
Category : Water pump