CyberPower

OL5KSTF - Inverter CyberPower - Free user manual and instructions

Find the device manual for free OL5KSTF CyberPower in PDF.

📄 17 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice CyberPower OL5KSTF - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Online Double-Conversion UPS
Brand CyberPower
Model OL5KSTF
Power Capacity 5000VA / 4500W
Input Voltage 208V / 220V / 230V / 240V
Output Voltage 208V / 220V / 230V / 240V (configurable)
Frequency Range 40 to 70 Hz
Waveform Pure Sine Wave
Transfer Time 0 ms (online double-conversion)
Battery Type Sealed Lead-Acid (maintenance-free)
Typical Runtime 5 to 10 minutes at full load (may vary with battery configuration)
Battery Charging Time 4 to 8 hours to reach 90% capacity
Communication Interfaces USB, RS-232, SmartSlot (optional SNMP/AS400)
Display LCD status panel with controls
Advanced Features Automatic Voltage Regulation (AVR), surge protection, overload protection, short-circuit protection
Cooling Smart variable-speed fan
Dimensions (H x W x D) 176 x 440 x 700 mm (approximate)
Weight 60 kg (approximate)
Operating Temperature 0 to 40 °C
Noise Level Less than 55 dB
Safety Standards CE, UL, and other international certifications
Warranty 3 years for parts and labor, 1 year for battery
Maintenance and Cleaning Keep ventilation slots dust-free; replace battery every 3-5 years; run periodic self-test
Spare Parts and Repairability Battery, cooling fan, and control board are replaceable by qualified technicians

Frequently Asked Questions - OL5KSTF CyberPower

How do I set up the CyberPower OL5KSTF UPS for the first time?
Connect the UPS to a grounded wall outlet, then press the power button to start charging the internal battery. Allow the battery to charge for at least 4 hours before connecting your equipment. Afterwards, plug your critical devices into the output sockets and press the Test button to confirm the UPS is working properly.
What does online double-conversion technology mean?
Online double-conversion means the UPS continuously converts incoming AC power to DC to charge the battery and then converts DC back to AC to power your equipment. This provides zero transfer time and perfect isolation from utility power irregularities, ensuring the highest level of protection.
How often should I replace the battery in the OL5KSTF?
The typical battery life is 3 to 5 years depending on usage and environmental conditions. CyberPower recommends replacing the battery when the battery health indicator drops below 80% or after 4 years of use, whichever comes first.
Can I connect the UPS to a network for remote monitoring?
Yes, the OL5KSTF is equipped with USB and RS-232 ports, and it also includes a SmartSlot for installing an optional SNMP/AS400 card. This allows you to monitor and manage the UPS remotely via network management software.
How do I protect my equipment from power surges?
The OL5KSTF includes built-in surge protection and Automatic Voltage Regulation (AVR). It automatically corrects voltage fluctuations and filters out spikes without using battery power, which extends the life of both the UPS and your connected equipment.
What is the recommended maintenance routine for this UPS?
Regular maintenance includes keeping the vents clean of dust, performing a monthly self-test, checking battery health quarterly, and ensuring the operating environment is within the specified temperature range (0-40°C). Avoid deep discharges and charge the UPS immediately after a power outage.
Can I replace the internal battery myself?
The battery is user-replaceable in most cases, but you should consult the manual for safety procedures. If you are not comfortable working with high-voltage electronics, it is best to contact a qualified technician or CyberPower support for assistance.
What does the LCD display show?
The LCD panel shows important information such as input/output voltage, load level, battery charge, runtime estimate, alarm status, and operating mode (e.g., normal, battery, or bypass). Use the buttons to navigate through the display settings.
Is the OL5KSTF suitable for sensitive electronic equipment?
Absolutely. The OL5KSTF delivers a pure sine wave output and zero transfer time, making it ideal for servers, network switches, medical devices, and other sensitive electronics that require clean, uninterrupted power.
What precautions should I take during a lightning storm?
While the OL5KSTF has built-in surge protection, it is recommended to also use a dedicated lightning protection system for maximum safety. Additionally, ensure the UPS is plugged into a properly grounded outlet and avoid touching connected equipment during a thunderstorm.

User questions about OL5KSTF CyberPower

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Inverter in PDF format for free! Find your manual OL5KSTF - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OL5KSTF by CyberPower.

USER MANUAL OL5KSTF CyberPower

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CyberPower

Model : OL5KSTF

Category : Inverter