PRL1500RT2UC - Inverter CyberPower - Free user manual and instructions
Find the device manual for free PRL1500RT2UC CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Brand | CyberPower |
| Model | PRL1500RT2UC |
| Form Factor | Rack/Tower convertible 2U |
| Rated Power | 1500VA / 1350W |
| Output Voltage | 120 VAC ± 5% |
| Input Voltage | 95–140 VAC |
| Frequency | 50/60 Hz ± 6% auto-sensing |
| Waveform | Pure sine wave |
| Topology | Line-interactive with Smart App Sinewave |
| Output Sockets | 8 NEMA 5-15R |
| Battery Type | Sealed lead-acid, user-replaceable |
| Runtime (half load) | Approximately 12 minutes |
| Runtime (full load) | Approximately 3 minutes |
| LCD Display | Intuitive LCD showing load, battery, and status |
| Communication Ports | USB, RS-232, EPO, and SNMP/HTTP slot |
| Protection Features | Surge, overload, short-circuit, and low-voltage |
| Dimensions (W × D × H) | 17.4 × 19.0 × 3.5 inches (440 × 483 × 89 mm) |
| Weight | 70 lbs (31.7 kg) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | 5°F to 113°F (-15°C to 45°C) |
| Ventilation | Front-to-rear airflow; maintain clearance |
| Maintenance | Keep vents clean; wipe with dry cloth |
| Safety Certifications | UL 1778, CSA, FCC |
| Reparability | Battery replacement without special tools |
Frequently Asked Questions - PRL1500RT2UC CyberPower
How do I replace the battery in my CyberPower PRL1500RT2UC UPS?
To replace the battery, first power off the UPS and disconnect all equipment. Slide out the battery compartment latch on the front panel, gently pull the battery pack, disconnect the terminals, and remove the old battery. Install the new battery by connecting the terminals and sliding it back into the compartment. Reboot the UPS and allow it to charge for 8 hours. Always dispose of old batteries properly.
How do I connect the UPS to my computer and monitor power?
Connect the included USB cable from the UPS to your computer and install the PowerPanel Business software. After installation, you can monitor voltage, frequency, load, battery runtime, and set automatic shutdown preferences.
Can this UPS be mounted in a rack?
Yes, the PRL1500RT2UC supports 2U rackmount installation. The package includes rack-mounting brackets and screws. The unit can also be positioned as a tower using the provided stand feet.
What is the typical runtime for this UPS?
At half load (675W), you can expect approximately 12 minutes of runtime. At full load (1350W), runtime is about 3 minutes. You can extend runtime by adding an optional external battery pack (EBP) if available.
How often should I clean and maintain my UPS?
Clean the exterior with a soft dry cloth every few months. Ensure the ventilation vents are free of dust and debris, and verify that the surrounding area allows free airflow. Test the UPS monthly by pressing the self-test button.
How do I perform a self-test on the PRL1500RT2UC?
Press the Self-Test button on the LCD panel to initiate a diagnostic test. The UPS will switch to battery mode for a few seconds and verify the battery and inverter are functioning correctly. Results appear on the LCD.
What should I do if the UPS alarms continuously?
Check the LCD for error codes. Common causes include overload, battery fault, or low battery. Reduce the connected load to below the rated power, let the battery recharge, or replace the battery if needed. If the alarm persists, contact CyberPower support.
Can I use the UPS with a generator?
Yes, the UPS can operate on generator power if the generator provides stable voltage and frequency within the input range (95–140 VAC, 50/60 Hz). Ensure the generator is large enough to handle the UPS output plus startup surges.
Is surge protection included?
Yes, the PRL1500RT2UC includes built-in surge protection with a standard surge capacity of 1400 joules. It supports both coaxial and network surge protection as well.
What is the warranty and how do I get support?
CyberPower provides a 3-year warranty for the UPS and a 3-year connected-equipment guarantee. For support, visit the CyberPower website or call customer service. Register your product online to activate the warranty.
User questions about PRL1500RT2UC CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual PRL1500RT2UC - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRL1500RT2UC by CyberPower.